[asterisk-users] Trouble with unicall
Alvaro Parres
aparres at gmail.com
Sun Jun 1 20:52:22 CDT 2008
Alex:
Do you change all your config, span and channels?? or only de span ?...
Also i didn't see that you tell that card is blink on red... i think that
maybe your physical connection are incorrect, could you tell us how are you
connecting.
Also have you try in both side (provider equipment, and you card) to make
a loop ???
Alvaro Parres
On Sun, Jun 1, 2008 at 7:55 PM, Alejandro Fernandez <allcontrol at gmail.com>
wrote:
> Dear Alvaro
>
> In my zaptel.conf file I configured as:
> span=1,1,0,ccs,hdb3
> bchan=1-15,17-31
> dchan=16
>
> I changed with the value you told me, but still the same message error.
>
> Alejandro
>
>
> 2008/6/1 Alvaro Parres <aparres at gmail.com>:
>
> Alejandro:
>>
>> I think that you problem is at /etc/zaptel.conf file... becouse you
>> config you card as CCS/HDB3, that configuration normaly is for data or isdn
>> connections.
>>
>> Try setting as CAS,HDB3.... an example of the file can be:
>>
>>
>> span=1,1,0,cas,hdb3
>> cas=1-15:1101
>> dchan=16
>> cas=17-31:1101
>>
>>
>>
>> On Sun, Jun 1, 2008 at 5:37 PM, Alejandro Fernandez <allcontrol at gmail.com>
>> wrote:
>>
>>>
>>> Dear List Pal
>>>
>>> I have downloaded your astunicall-1.4.18-0.2.tar.gz file and I followed
>>>
>>>
>>> carefully your step.
>>> Every step went with out any problem.
>>> Beside this I have a Digium TE122P card as a E1 digital trame.
>>>
>>> I live in Argentina.
>>> When I issue ztcfg -vv it show me:
>>>
>>> Zaptel Version: 1.4.9.2
>>> Echo Canceller: MG2
>>> Configuration
>>> ======================
>>>
>>> SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>>
>>>
>>>
>>> Channel map:
>>>
>>> Channel 01: Clear channel (Default) (Slaves: 01)
>>> Channel 02: Clear channel (Default) (Slaves: 02)
>>> Channel 03: Clear channel (Default) (Slaves: 03)
>>> Channel 04: Clear channel (Default) (Slaves: 04)
>>>
>>>
>>>
>>> Channel 05: Clear channel (Default) (Slaves: 05)
>>> Channel 06: Clear channel (Default) (Slaves: 06)
>>> Channel 07: Clear channel (Default) (Slaves: 07)
>>> Channel 08: Clear channel (Default) (Slaves: 08)
>>> Channel 09: Clear channel (Default) (Slaves: 09)
>>>
>>>
>>>
>>> Channel 10: Clear channel (Default) (Slaves: 10)
>>> Channel 11: Clear channel (Default) (Slaves: 11)
>>> Channel 12: Clear channel (Default) (Slaves: 12)
>>> Channel 13: Clear channel (Default) (Slaves: 13)
>>> Channel 14: Clear channel (Default) (Slaves: 14)
>>>
>>>
>>>
>>> Channel 15: Clear channel (Default) (Slaves: 15)
>>> Channel 16: D-channel (Default) (Slaves: 16)
>>> Channel 17: Clear channel (Default) (Slaves: 17)
>>> Channel 18: Clear channel (Default) (Slaves: 18)
>>> Channel 19: Clear channel (Default) (Slaves: 19)
>>>
>>>
>>>
>>> Channel 20: Clear channel (Default) (Slaves: 20)
>>> Channel 21: Clear channel (Default) (Slaves: 21)
>>> Channel 22: Clear channel (Default) (Slaves: 22)
>>> Channel 23: Clear channel (Default) (Slaves: 23)
>>> Channel 24: Clear channel (Default) (Slaves: 24)
>>>
>>>
>>>
>>> Channel 25: Clear channel (Default) (Slaves: 25)
>>> Channel 26: Clear channel (Default) (Slaves: 26)
>>> Channel 27: Clear channel (Default) (Slaves: 27)
>>> Channel 28: Clear channel (Default) (Slaves: 28)
>>> Channel 29: Clear channel (Default) (Slaves: 29)
>>>
>>>
>>>
>>> Channel 30: Clear channel (Default) (Slaves: 30)
>>> Channel 31: Clear channel (Default) (Slaves: 31)
>>>
>>> 31 channels to configure.
>>>
>>> cat /proc/zaptel/1:
>>>
>>> Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) HDB3/CCS RED
>>>
>>>
>>>
>>> IRQ misses: 29
>>>
>>> 1 WCT1/0/1 Clear
>>> 2 WCT1/0/2 Clear
>>> 3 WCT1/0/3 Clear
>>> 4 WCT1/0/4 Clear
>>> 5 WCT1/0/5 Clear
>>> 6 WCT1/0/6 Clear
>>> 7 WCT1/0/7 Clear
>>>
>>>
>>>
>>> 8 WCT1/0/8 Clear
>>> 9 WCT1/0/9 Clear
>>> 10 WCT1/0/10 Clear
>>> 11 WCT1/0/11 Clear
>>> 12 WCT1/0/12 Clear
>>> 13 WCT1/0/13 Clear
>>> 14 WCT1/0/14 Clear
>>>
>>>
>>>
>>> 15 WCT1/0/15 Clear
>>> 16 WCT1/0/16 HDLCFCS
>>> 17 WCT1/0/17 Clear
>>> 18 WCT1/0/18 Clear
>>> 19 WCT1/0/19 Clear
>>> 20 WCT1/0/20 Clear
>>> 21 WCT1/0/21 Clear
>>>
>>>
>>>
>>> 22 WCT1/0/22 Clear
>>> 23 WCT1/0/23 Clear
>>> 24 WCT1/0/24 Clear
>>> 25 WCT1/0/25 Clear
>>> 26 WCT1/0/26 Clear
>>> 27 WCT1/0/27 Clear
>>> 28 WCT1/0/28 Clear
>>>
>>>
>>>
>>> 29 WCT1/0/29 Clear
>>> 30 WCT1/0/30 Clear
>>> 31 WCT1/0/31 Clear
>>>
>>> The card is blinking the red LED.
>>> Apparently all have gone well. But /var/log/asterisk/messages says:
>>>
>>> [May 29 18:34:40] ERROR[2780] chan_unicall.c: Unable to open channel 1:
>>>
>>>
>>>
>>> Invalid argument
>>> here = 0, tmp->channel = 0, channel = 1
>>> [May 29 18:34:40] ERROR[2780] chan_unicall.c: Unable to register channel
>>> '1-15'
>>>
>>> Any suggestion are wellcome.
>>>
>>> TIA
>>>
>>> Alejandro
>>>
>>>
>>>
>>> _______________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>>
>>
>> --
>> Alvaro I. Parres Peredo
>> Director de IT
>> Grupo Xmarts SA de CV
>> Tel: +52 (33) 35 63 6261 Ext. 112
>> 01 800 087 2260
>> Cel: +52 (33) 33 68 1087
>> alvaro.parres at xmarts.com.mx
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
>
> --
> Lic. Alejandro Fernández Herrero
> Product Manager
> www.all-control.com.ar
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
Alvaro I. Parres Peredo
Director de IT
Grupo Xmarts SA de CV
Tel: +52 (33) 35 63 6261 Ext. 112
01 800 087 2260
Cel: +52 (33) 33 68 1087
alvaro.parres at xmarts.com.mx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080601/d7fd819c/attachment.htm
More information about the asterisk-users
mailing list