[asterisk-users] Trouble with unicall

[Alvaro Parres]

Alejandro:

   I think that you problem is at /etc/zaptel.conf file... becouse you
config you card as CCS/HDB3, that configuration normaly is for data or isdn
connections.

  Try setting as CAS,HDB3.... an example of the file can be:


span=1,1,0,cas,hdb3
cas=1-15:1101
dchan=16
cas=17-31:1101



On Sun, Jun 1, 2008 at 5:37 PM, Alejandro Fernandez <allcontrol at gmail.com>
wrote:

>
> Dear List Pal
>
> I have downloaded your astunicall-1.4.18-0.2.tar.gz file and I followed
> carefully your step.
> Every step went with out any problem.
> Beside this I have a Digium TE122P card as a E1 digital trame.
>
> I live in Argentina.
> When I issue ztcfg -vv it show me:
>
> Zaptel Version: 1.4.9.2
> Echo Canceller: MG2
> Configuration
> ======================
>
> SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>
> Channel map:
>
> Channel 01: Clear channel (Default) (Slaves: 01)
> Channel 02: Clear channel (Default) (Slaves: 02)
> Channel 03: Clear channel (Default) (Slaves: 03)
> Channel 04: Clear channel (Default) (Slaves: 04)
>
> Channel 05: Clear channel (Default) (Slaves: 05)
> Channel 06: Clear channel (Default) (Slaves: 06)
> Channel 07: Clear channel (Default) (Slaves: 07)
> Channel 08: Clear channel (Default) (Slaves: 08)
> Channel 09: Clear channel (Default) (Slaves: 09)
>
> Channel 10: Clear channel (Default) (Slaves: 10)
> Channel 11: Clear channel (Default) (Slaves: 11)
> Channel 12: Clear channel (Default) (Slaves: 12)
> Channel 13: Clear channel (Default) (Slaves: 13)
> Channel 14: Clear channel (Default) (Slaves: 14)
>
> Channel 15: Clear channel (Default) (Slaves: 15)
> Channel 16: D-channel (Default) (Slaves: 16)
> Channel 17: Clear channel (Default) (Slaves: 17)
> Channel 18: Clear channel (Default) (Slaves: 18)
> Channel 19: Clear channel (Default) (Slaves: 19)
>
> Channel 20: Clear channel (Default) (Slaves: 20)
> Channel 21: Clear channel (Default) (Slaves: 21)
> Channel 22: Clear channel (Default) (Slaves: 22)
> Channel 23: Clear channel (Default) (Slaves: 23)
> Channel 24: Clear channel (Default) (Slaves: 24)
>
> Channel 25: Clear channel (Default) (Slaves: 25)
> Channel 26: Clear channel (Default) (Slaves: 26)
> Channel 27: Clear channel (Default) (Slaves: 27)
> Channel 28: Clear channel (Default) (Slaves: 28)
> Channel 29: Clear channel (Default) (Slaves: 29)
>
> Channel 30: Clear channel (Default) (Slaves: 30)
> Channel 31: Clear channel (Default) (Slaves: 31)
>
> 31 channels to configure.
>
> cat /proc/zaptel/1:
>
> Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) HDB3/CCS RED
>
>         IRQ misses: 29
>
>            1 WCT1/0/1 Clear
>            2 WCT1/0/2 Clear
>            3 WCT1/0/3 Clear
>            4 WCT1/0/4 Clear
>            5 WCT1/0/5 Clear
>            6 WCT1/0/6 Clear
>            7 WCT1/0/7 Clear
>
>            8 WCT1/0/8 Clear
>            9 WCT1/0/9 Clear
>           10 WCT1/0/10 Clear
>           11 WCT1/0/11 Clear
>           12 WCT1/0/12 Clear
>           13 WCT1/0/13 Clear
>           14 WCT1/0/14 Clear
>
>           15 WCT1/0/15 Clear
>           16 WCT1/0/16 HDLCFCS
>           17 WCT1/0/17 Clear
>           18 WCT1/0/18 Clear
>           19 WCT1/0/19 Clear
>           20 WCT1/0/20 Clear
>           21 WCT1/0/21 Clear
>
>           22 WCT1/0/22 Clear
>           23 WCT1/0/23 Clear
>           24 WCT1/0/24 Clear
>           25 WCT1/0/25 Clear
>           26 WCT1/0/26 Clear
>           27 WCT1/0/27 Clear
>           28 WCT1/0/28 Clear
>
>           29 WCT1/0/29 Clear
>           30 WCT1/0/30 Clear
>           31 WCT1/0/31 Clear
>
> The card is blinking the red LED.
> Apparently all have gone well. But /var/log/asterisk/messages says:
>
> [May 29 18:34:40] ERROR[2780] chan_unicall.c: Unable to open channel 1:
>
> Invalid argument
> here = 0, tmp->channel = 0, channel = 1
> [May 29 18:34:40] ERROR[2780] chan_unicall.c: Unable to register channel
> '1-15'
>
> Any suggestion are wellcome.
>
> TIA
>
> Alejandro
>
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Alvaro I. Parres Peredo
Director de IT
Grupo Xmarts SA de CV
Tel: +52 (33) 35 63 6261 Ext. 112
01 800 087 2260
Cel: +52 (33) 33 68 1087
alvaro.parres at xmarts.com.mx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080601/0a853f01/attachment.htm