[asterisk-users] Trouble with unicall

[Alejandro Fernandez]

Dear List Pal

I have downloaded your astunicall-1.4.18-0.2.tar.gz file and I followed
carefully your step.
Every step went with out any problem.
Beside this I have a Digium TE122P card as a E1 digital trame.
I live in Argentina.
When I issue ztcfg -vv it show me:

Zaptel Version: 1.4.9.2
Echo Canceller: MG2
Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)

31 channels to configure.

cat /proc/zaptel/1:

Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) HDB3/CCS RED
        IRQ misses: 29

           1 WCT1/0/1 Clear
           2 WCT1/0/2 Clear
           3 WCT1/0/3 Clear
           4 WCT1/0/4 Clear
           5 WCT1/0/5 Clear
           6 WCT1/0/6 Clear
           7 WCT1/0/7 Clear
           8 WCT1/0/8 Clear
           9 WCT1/0/9 Clear
          10 WCT1/0/10 Clear
          11 WCT1/0/11 Clear
          12 WCT1/0/12 Clear
          13 WCT1/0/13 Clear
          14 WCT1/0/14 Clear
          15 WCT1/0/15 Clear
          16 WCT1/0/16 HDLCFCS
          17 WCT1/0/17 Clear
          18 WCT1/0/18 Clear
          19 WCT1/0/19 Clear
          20 WCT1/0/20 Clear
          21 WCT1/0/21 Clear
          22 WCT1/0/22 Clear
          23 WCT1/0/23 Clear
          24 WCT1/0/24 Clear
          25 WCT1/0/25 Clear
          26 WCT1/0/26 Clear
          27 WCT1/0/27 Clear
          28 WCT1/0/28 Clear
          29 WCT1/0/29 Clear
          30 WCT1/0/30 Clear
          31 WCT1/0/31 Clear

The card is blinking the red LED.
Apparently all have gone well. But /var/log/asterisk/messages says:

[May 29 18:34:40] ERROR[2780] chan_unicall.c: Unable to open channel 1:
Invalid argument
here = 0, tmp->channel = 0, channel = 1
[May 29 18:34:40] ERROR[2780] chan_unicall.c: Unable to register channel
'1-15'

Any suggestion are wellcome.

TIA

Alejandro
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080601/66b69ce6/attachment.htm