<br clear="all"><pre>Dear List Pal<br><br>I have downloaded your astunicall-1.4.18-0.2.tar.gz file and I followed<br>carefully your step.<br>Every step went with out any problem.<br>Beside this I have a Digium TE122P card as a E1 digital trame.<br>
I live in Argentina.<br>When I issue ztcfg -vv it show me:<br><br>Zaptel Version: <a href="http://1.4.9.2">1.4.9.2</a><br>Echo Canceller: MG2<br>Configuration<br>======================<br><br>SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)<br>
<br>Channel map:<br><br>Channel 01: Clear channel (Default) (Slaves: 01)<br>Channel 02: Clear channel (Default) (Slaves: 02)<br>Channel 03: Clear channel (Default) (Slaves: 03)<br>Channel 04: Clear channel (Default) (Slaves: 04)<br>
Channel 05: Clear channel (Default) (Slaves: 05)<br>Channel 06: Clear channel (Default) (Slaves: 06)<br>Channel 07: Clear channel (Default) (Slaves: 07)<br>Channel 08: Clear channel (Default) (Slaves: 08)<br>Channel 09: Clear channel (Default) (Slaves: 09)<br>
Channel 10: Clear channel (Default) (Slaves: 10)<br>Channel 11: Clear channel (Default) (Slaves: 11)<br>Channel 12: Clear channel (Default) (Slaves: 12)<br>Channel 13: Clear channel (Default) (Slaves: 13)<br>Channel 14: Clear channel (Default) (Slaves: 14)<br>
Channel 15: Clear channel (Default) (Slaves: 15)<br>Channel 16: D-channel (Default) (Slaves: 16)<br>Channel 17: Clear channel (Default) (Slaves: 17)<br>Channel 18: Clear channel (Default) (Slaves: 18)<br>Channel 19: Clear channel (Default) (Slaves: 19)<br>
Channel 20: Clear channel (Default) (Slaves: 20)<br>Channel 21: Clear channel (Default) (Slaves: 21)<br>Channel 22: Clear channel (Default) (Slaves: 22)<br>Channel 23: Clear channel (Default) (Slaves: 23)<br>Channel 24: Clear channel (Default) (Slaves: 24)<br>
Channel 25: Clear channel (Default) (Slaves: 25)<br>Channel 26: Clear channel (Default) (Slaves: 26)<br>Channel 27: Clear channel (Default) (Slaves: 27)<br>Channel 28: Clear channel (Default) (Slaves: 28)<br>Channel 29: Clear channel (Default) (Slaves: 29)<br>
Channel 30: Clear channel (Default) (Slaves: 30)<br>Channel 31: Clear channel (Default) (Slaves: 31)<br><br>31 channels to configure.<br><br>cat /proc/zaptel/1:<br><br>Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) HDB3/CCS RED<br>
IRQ misses: 29<br><br> 1 WCT1/0/1 Clear<br> 2 WCT1/0/2 Clear<br> 3 WCT1/0/3 Clear<br> 4 WCT1/0/4 Clear<br> 5 WCT1/0/5 Clear<br> 6 WCT1/0/6 Clear<br> 7 WCT1/0/7 Clear<br>
8 WCT1/0/8 Clear<br> 9 WCT1/0/9 Clear<br> 10 WCT1/0/10 Clear<br> 11 WCT1/0/11 Clear<br> 12 WCT1/0/12 Clear<br> 13 WCT1/0/13 Clear<br> 14 WCT1/0/14 Clear<br>
15 WCT1/0/15 Clear<br> 16 WCT1/0/16 HDLCFCS<br> 17 WCT1/0/17 Clear<br> 18 WCT1/0/18 Clear<br> 19 WCT1/0/19 Clear<br> 20 WCT1/0/20 Clear<br> 21 WCT1/0/21 Clear<br>
22 WCT1/0/22 Clear<br> 23 WCT1/0/23 Clear<br> 24 WCT1/0/24 Clear<br> 25 WCT1/0/25 Clear<br> 26 WCT1/0/26 Clear<br> 27 WCT1/0/27 Clear<br> 28 WCT1/0/28 Clear<br>
29 WCT1/0/29 Clear<br> 30 WCT1/0/30 Clear<br> 31 WCT1/0/31 Clear<br><br>The card is blinking the red LED.<br>Apparently all have gone well. But /var/log/asterisk/messages says:<br><br>[May 29 18:34:40] ERROR[2780] chan_unicall.c: Unable to open channel 1:<br>
Invalid argument<br>here = 0, tmp->channel = 0, channel = 1<br>[May 29 18:34:40] ERROR[2780] chan_unicall.c: Unable to register channel<br>'1-15'<br><br>Any suggestion are wellcome.<br><br>TIA<br><br>Alejandro</pre>
<br>