[asterisk-users] Cisco 7941G-GE with Asterisk and CTPSEP odyssee

[Glenn Cobb]

Roy,

I just attempted to use a blank CTLSEP(mac).tlv file with my Cisco 7971G-GE
and it would not complete booting. The message log shows that the when the
phone finds the blank CTLSEP(mac).tlv file it says "CTL update failed",
retries two more times, then the status line shows "Configuring IP" then the
log shows "File Auth Fail : CTFFile.tlv". Looks to me like it is  possibly
searching for another file, any ideas?

Glenn

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Anciso, Roy
> Sent: Friday, January 04, 2008 8:43 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Cisco 7941G-GE with Asterisk 
> and CTPSEP odyssee
> 
> I've upgraded from SCCP to SIP 8.x.x branch on 7961g and 
> 7911g without any problems. 
> 
> As far as the CTLSEP File (Straight from Cisco): 
> http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon
> /english/i
> pp7960/addprot/mgcp/frmwrup.htm#wp1047292
> 
> The CTLSEP MAC file is a certificate trust list, which if 
> populated, contains information about the servers to which 
> the phone is attempting to connect and whether the server 
> connection will be secure or nonsecure. 
> 
> Based on the information above an empty file will work just fine.  
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Patrick
> Sent: Friday, January 04, 2008 5:02 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Cisco 7941G-GE with Asterisk 
> and CTPSEP odyssee
> 
> 
> On Fri, 2008-01-04 at 09:11 +0100, Christophorus Laube wrote:
> > Hi list,
> > 
> > I have bought some Cisco 7941G-GE IP phones and want to use 
> them with 
> > asterisk. Before bying I tested the whole setup with three 
> different 
> > models of the old 79X0 series (a 7912, 7940 and a 7960). 
> Flashing the 
> > formerly provided SCCP-Image to SIP was no problem, but now it
> complains
> > about a nonexistent CTLSEP<mac>.tlv file. Most of the howtos say 
> > something about an empty file but that does not suit to me. Does
> anyone
> > of you have experience in getting these phones to work or 
> can point me 
> > to any information bringing me back in the game?
> > Thanks in advance,
> 
> I don't remember if I had this same problem with a 7961G but 
> I did figure out that you can not do an upgrade from factory 
> default SCCP to the latest SIP 8.x.x firmware. In my case the 
> phone just did not work properly. To make it work I 
> downgraded the phone back to SIP 7.x firmware (iirc I used 
> 7.5) and then upgraded to the latest SIP 8.x.x firmware.
> 
> Hope this helps.
> 
> Regards,
> Patrick
> 
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>