[asterisk-users] asterisk hylafax iaxmodem

Wed Oct 17 05:07:15 CDT 2007

Witch interface are you using to send faxes, SIP, IAX, ZAP, MISDN,...,etc

VoipCrazy


2007/10/17, Giedrius Augys <voipas at gmail.com>:
>
> CountryCode:            1
> AreaCode:               800
> FAXNumber:              +3705203230
> LongDistancePrefix:     1
> InternationalPrefix:    011
> DialStringRules:        etc/dialrules
> ServerTracing:          0xFFF
> SessionTracing:         0xFFF
> RecvFileMode:           0600
> LogFileMode:            0600
> DeviceMode:             0600
> RingsBeforeAnswer:      1
> SpeakerVolume:          off
> GettyArgs:              "-h %l dx_%s"
> LocalIdentifier:        "Giedrius Augys"
> TagLineFont:            etc/lutRS18.pcf
> TagLineFormat:          "Nuo %%l|%c|Page %%P of %%T"
> MaxRecvPages:           200
> #
> #
> # Modem-related stuff: should reflect modem command interface
> # and hardware connection/cabling (e.g. flow control).
> #
> ModemType:              Class1          # use this to supply a hint
>
> #
> # Enabling this will use the hfaxd-protocol to set Caller*ID
> #
> #ModemSetOriginCmd:     AT+VSID="%s","%d"
>
> #
> # If "glare" during initialization becomes a problem then take
> # the modem off-hook during initialization, and then place it
> # back on-hook when done.
> #
> #ModemResetCmds:        "ATH1\nAT+VCID=1"       # enables CallID display
> #ModemReadyCmds:        ATH0
>
> Class1AdaptRecvCmd:     AT+FAR=1
> Class1TMConnectDelay:   400             # counteract quick CONNECT
> response
>
> #
> # If you have trouble with V.17 receiving or sending,
> # you may want to enable one of these, respectively.
> #
> #Class1RMQueryCmd:      "!24,48,72,96"  # enable this to disable V.17receiving
> #Class1TMQueryCmd:      "!24,48,72,96"  # enable this to disable V.17sending
>
> #
> # You'll likely want Caller*ID display (also displays DID) enabled.
> #
> ModemResetCmds:         AT+VCID=1       # enables CallID display
>
> #
> # The pty does not support changing parity.
> #
> PagerTTYParity:         none
>
> #
> # If you are "missing" Caller*ID data on some calls (but not all)
> # and if you do not have adequate glare protection you may want to
> # not answer based on RINGs, but rather enable the CallIDAnswerLength
> # for NDID, disable AT+VCID=1 and do this:
> #
> #RingsBeforeAnswer: 0
> #ModemRingResponse: AT+VRID=1
>
> # Uncomment DATE and TIME if you really want them, but you probably don't.
> #CallIDPattern:          "DATE="
> #CallIDPattern:          "TIME="
> CallIDPattern:          "NMBR="
> CallIDPattern:          "NAME="
> CallIDPattern:          "ANID="
> #CallIDPattern:          "USER="        # username provided by call
> #CallIDPattern:          "PASS="        # password provided by call
> #CallIDPattern:          "CDID="        # DID context in call
> CallIDPattern:          "NDID="
> #CallIDAnswerLength:    4
>
>
>
>
> 2007/10/17, Jonn R Taylor <jonnt at taylortelephone.com>:
> >
> > Giedrius Augys wrote:
> > > Hi,
> > > I have problems with asterisk and hylafax+ iaxmodem. I can
> > successfully
> > > send faxes to Panasonic KX-FT932 fax, but with Xerox WorkCentre M20i I
> > > have problems: No carrier. This is hylafax log, maybe you can suggest
> > > me  where  to  find ...
> > >
> > > Oct 17 07:38:48.22: [22428]: SESSION BEGIN 000000041 180037052390906
> > > Oct 17 07:38:48.22: [22428]: HylaFAX (tm) Version 4.4.2
> > > Oct 17 07:38:48.22: [22428]: SEND FAX: JOB 27 DEST 37052390906 COMMID
> > > 000000041 DEVICE '/dev/ttyIAX0' FROM 'root < root at god>' USER root
> > > Oct 17 07:38:48.22: [22428]: STATE CHANGE: RUNNING -> SENDING
> > > Oct 17 07:38:48.22: [22428]: <-- [12:AT+FCLASS=1\r]
> > > Oct 17 07:38:48.22: [22428]: --> [2:OK]
> > > Oct 17 07:38:48.22 : [22428]: MODEM set XON/XOFF/FLUSH: input ignored,
> > > output disabled
> > > Oct 17 07:38:48.22: [22428]: DIAL 37052390906
> > > Oct 17 07:38: 48.22: [22428]: <-- [16:ATDT37052390906\r]
> > > Oct 17 07:39:30.86: [22428]: --> [10:NO CARRIER]
> > > Oct 17 07:39:30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 ERR
> > > [2] No carrier detected
> > > Oct 17 07:39: 30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 ERR
> > > [333] No carrier detected; too many attempts to dial
> > > Oct 17 07:39:31.86: [22428]: <-- [5:ATH0\r]
> > > Oct 17 07:39:31.86: [22428]: --> [2:OK]
> > > Oct 17 07:39:31.86: [22428]: MODEM set DTR OFF
> > > Oct 17 07:39:31.86: [22428]: MODEM set baud rate: 0 baud (flow control
> > > unchanged)
> > > Oct 17 07:39:31.86: [22428]: STATE CHANGE: SENDING -> MODEMWAIT
> > (timeout 5)
> > > Oct 17 07:39:31.86: [22428]: SESSION END
> > >
> > >
> > > --
> > > Pagarbiai  / Best Regards,
> > > Giedrius Augys
> > >
> > >
> > >
> > ------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> > >
> > > asterisk-users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > Please post your iaxmodem config file.
> >
> > Jonn
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
>
> --
> Pagarbiai  / Best Regards,
> Giedrius Augys
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071017/11bff57e/attachment.htm