[asterisk-users] asterisk hylafax iaxmodem

Giedrius Augys voipas at gmail.com
Wed Oct 17 05:25:39 CDT 2007


SIP, but I think I know whereis a problem. Fax is connected to d-link, and
is turn on t.38

2007/10/17, voip crazy <voipcrazy at gmail.com>:
>
> Witch interface are you using to send faxes, SIP, IAX, ZAP, MISDN,...,etc
>
> VoipCrazy
>
>
> 2007/10/17, Giedrius Augys <voipas at gmail.com>:
> >
> > CountryCode:            1
> > AreaCode:               800
> > FAXNumber:              +3705203230
> > LongDistancePrefix:     1
> > InternationalPrefix:    011
> > DialStringRules:        etc/dialrules
> > ServerTracing:          0xFFF
> > SessionTracing:         0xFFF
> > RecvFileMode:           0600
> > LogFileMode:            0600
> > DeviceMode:             0600
> > RingsBeforeAnswer:      1
> > SpeakerVolume:          off
> > GettyArgs:              "-h %l dx_%s"
> > LocalIdentifier:        "Giedrius Augys"
> > TagLineFont:            etc/lutRS18.pcf
> > TagLineFormat:          "Nuo %%l|%c|Page %%P of %%T"
> > MaxRecvPages:           200
> > #
> > #
> > # Modem-related stuff: should reflect modem command interface
> > # and hardware connection/cabling (e.g. flow control).
> > #
> > ModemType:              Class1          # use this to supply a hint
> >
> > #
> > # Enabling this will use the hfaxd-protocol to set Caller*ID
> > #
> > #ModemSetOriginCmd:     AT+VSID="%s","%d"
> >
> > #
> > # If "glare" during initialization becomes a problem then take
> > # the modem off-hook during initialization, and then place it
> > # back on-hook when done.
> > #
> > #ModemResetCmds:        "ATH1\nAT+VCID=1"       # enables CallID display
> >
> > #ModemReadyCmds:        ATH0
> >
> > Class1AdaptRecvCmd:     AT+FAR=1
> > Class1TMConnectDelay:   400             # counteract quick CONNECT
> > response
> >
> > #
> > # If you have trouble with V.17 receiving or sending,
> > # you may want to enable one of these, respectively.
> > #
> > #Class1RMQueryCmd:      "!24,48,72,96"  # enable this to disable V.17receiving
> > #Class1TMQueryCmd:      "!24,48,72,96"  # enable this to disable V.17sending
> >
> > #
> > # You'll likely want Caller*ID display (also displays DID) enabled.
> > #
> > ModemResetCmds:         AT+VCID=1       # enables CallID display
> >
> > #
> > # The pty does not support changing parity.
> > #
> > PagerTTYParity:         none
> >
> > #
> > # If you are "missing" Caller*ID data on some calls (but not all)
> > # and if you do not have adequate glare protection you may want to
> > # not answer based on RINGs, but rather enable the CallIDAnswerLength
> > # for NDID, disable AT+VCID=1 and do this:
> > #
> > #RingsBeforeAnswer: 0
> > #ModemRingResponse: AT+VRID=1
> >
> > # Uncomment DATE and TIME if you really want them, but you probably
> > don't.
> > #CallIDPattern:          "DATE="
> > #CallIDPattern:          "TIME="
> > CallIDPattern:          "NMBR="
> > CallIDPattern:          "NAME="
> > CallIDPattern:          "ANID="
> > #CallIDPattern:          "USER="        # username provided by call
> > #CallIDPattern:          "PASS="        # password provided by call
> > #CallIDPattern:          "CDID="        # DID context in call
> > CallIDPattern:          "NDID="
> > #CallIDAnswerLength:    4
> >
> >
> >
> >
> > 2007/10/17, Jonn R Taylor <jonnt at taylortelephone.com >:
> > >
> > > Giedrius Augys wrote:
> > > > Hi,
> > > > I have problems with asterisk and hylafax+ iaxmodem. I can
> > > successfully
> > > > send faxes to Panasonic KX-FT932 fax, but with Xerox WorkCentre M20i
> > > I
> > > > have problems: No carrier. This is hylafax log, maybe you can
> > > suggest
> > > > me  where  to  find ...
> > > >
> > > > Oct 17 07:38:48.22: [22428]: SESSION BEGIN 000000041 180037052390906
> > > > Oct 17 07:38:48.22: [22428]: HylaFAX (tm) Version 4.4.2
> > > > Oct 17 07:38:48.22: [22428]: SEND FAX: JOB 27 DEST 37052390906
> > > COMMID
> > > > 000000041 DEVICE '/dev/ttyIAX0' FROM 'root < root at god>' USER root
> > > > Oct 17 07:38:48.22: [22428]: STATE CHANGE: RUNNING -> SENDING
> > > > Oct 17 07:38:48.22: [22428]: <-- [12:AT+FCLASS=1\r]
> > > > Oct 17 07:38:48.22: [22428]: --> [2:OK]
> > > > Oct 17 07:38:48.22 : [22428]: MODEM set XON/XOFF/FLUSH: input
> > > ignored,
> > > > output disabled
> > > > Oct 17 07:38:48.22: [22428]: DIAL 37052390906
> > > > Oct 17 07:38: 48.22: [22428]: <-- [16:ATDT37052390906\r]
> > > > Oct 17 07:39:30.86: [22428]: --> [10:NO CARRIER]
> > > > Oct 17 07:39:30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906
> > > ERR
> > > > [2] No carrier detected
> > > > Oct 17 07:39: 30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906
> > > ERR
> > > > [333] No carrier detected; too many attempts to dial
> > > > Oct 17 07:39:31.86: [22428]: <-- [5:ATH0\r]
> > > > Oct 17 07:39:31.86: [22428]: --> [2:OK]
> > > > Oct 17 07:39:31.86: [22428]: MODEM set DTR OFF
> > > > Oct 17 07:39:31.86: [22428]: MODEM set baud rate: 0 baud (flow
> > > control
> > > > unchanged)
> > > > Oct 17 07:39:31.86: [22428]: STATE CHANGE: SENDING -> MODEMWAIT
> > > (timeout 5)
> > > > Oct 17 07:39:31.86: [22428]: SESSION END
> > > >
> > > >
> > > > --
> > > > Pagarbiai  / Best Regards,
> > > > Giedrius Augys
> > > >
> > > >
> > > >
> > > ------------------------------------------------------------------------
> > > >
> > > > _______________________________________________
> > > > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> > > >
> > > > asterisk-users mailing list
> > > > To UNSUBSCRIBE or update options visit:
> > > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > > Please post your iaxmodem config file.
> > >
> > > Jonn
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> > >
> > > asterisk-users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> >
> >
> > --
> > Pagarbiai  / Best Regards,
> > Giedrius Augys
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Pagarbiai  / Best Regards,
Giedrius Augys
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071017/c11c67c8/attachment.htm 


More information about the asterisk-users mailing list