[asterisk-users] asterisk hylafax iaxmodem

[Giedrius Augys]

CountryCode:            1
AreaCode:               800
FAXNumber:              +3705203230
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          0xFFF
SessionTracing:         0xFFF
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "Giedrius Augys"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "Nuo %%l|%c|Page %%P of %%T"
MaxRecvPages:           200
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class1          # use this to supply a hint

#
# Enabling this will use the hfaxd-protocol to set Caller*ID
#
#ModemSetOriginCmd:     AT+VSID="%s","%d"

#
# If "glare" during initialization becomes a problem then take
# the modem off-hook during initialization, and then place it
# back on-hook when done.
#
#ModemResetCmds:        "ATH1\nAT+VCID=1"       # enables CallID display
#ModemReadyCmds:        ATH0

Class1AdaptRecvCmd:     AT+FAR=1
Class1TMConnectDelay:   400             # counteract quick CONNECT response

#
# If you have trouble with V.17 receiving or sending,
# you may want to enable one of these, respectively.
#
#Class1RMQueryCmd:      "!24,48,72,96"  # enable this to disable V.17receiving
#Class1TMQueryCmd:      "!24,48,72,96"  # enable this to disable V.17sending

#
# You'll likely want Caller*ID display (also displays DID) enabled.
#
ModemResetCmds:         AT+VCID=1       # enables CallID display

#
# The pty does not support changing parity.
#
PagerTTYParity:         none

#
# If you are "missing" Caller*ID data on some calls (but not all)
# and if you do not have adequate glare protection you may want to
# not answer based on RINGs, but rather enable the CallIDAnswerLength
# for NDID, disable AT+VCID=1 and do this:
#
#RingsBeforeAnswer: 0
#ModemRingResponse: AT+VRID=1

# Uncomment DATE and TIME if you really want them, but you probably don't.
#CallIDPattern:          "DATE="
#CallIDPattern:          "TIME="
CallIDPattern:          "NMBR="
CallIDPattern:          "NAME="
CallIDPattern:          "ANID="
#CallIDPattern:          "USER="        # username provided by call
#CallIDPattern:          "PASS="        # password provided by call
#CallIDPattern:          "CDID="        # DID context in call
CallIDPattern:          "NDID="
#CallIDAnswerLength:    4




2007/10/17, Jonn R Taylor <jonnt at taylortelephone.com>:
>
> Giedrius Augys wrote:
> > Hi,
> > I have problems with asterisk and hylafax+ iaxmodem. I can successfully
> > send faxes to Panasonic KX-FT932 fax, but with Xerox WorkCentre M20i I
> > have problems: No carrier. This is hylafax log, maybe you can suggest
> > me  where  to  find ...
> >
> > Oct 17 07:38:48.22: [22428]: SESSION BEGIN 000000041 180037052390906
> > Oct 17 07:38:48.22: [22428]: HylaFAX (tm) Version 4.4.2
> > Oct 17 07:38:48.22: [22428]: SEND FAX: JOB 27 DEST 37052390906 COMMID
> > 000000041 DEVICE '/dev/ttyIAX0' FROM 'root < root at god>' USER root
> > Oct 17 07:38:48.22: [22428]: STATE CHANGE: RUNNING -> SENDING
> > Oct 17 07:38:48.22: [22428]: <-- [12:AT+FCLASS=1\r]
> > Oct 17 07:38:48.22: [22428]: --> [2:OK]
> > Oct 17 07:38:48.22 : [22428]: MODEM set XON/XOFF/FLUSH: input ignored,
> > output disabled
> > Oct 17 07:38:48.22: [22428]: DIAL 37052390906
> > Oct 17 07:38:48.22: [22428]: <-- [16:ATDT37052390906\r]
> > Oct 17 07:39:30.86: [22428]: --> [10:NO CARRIER]
> > Oct 17 07:39:30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 ERR
> > [2] No carrier detected
> > Oct 17 07:39:30.86: [22428]: SEND FAILED: JOB 27 DEST 37052390906 ERR
> > [333] No carrier detected; too many attempts to dial
> > Oct 17 07:39:31.86: [22428]: <-- [5:ATH0\r]
> > Oct 17 07:39:31.86: [22428]: --> [2:OK]
> > Oct 17 07:39:31.86: [22428]: MODEM set DTR OFF
> > Oct 17 07:39:31.86: [22428]: MODEM set baud rate: 0 baud (flow control
> > unchanged)
> > Oct 17 07:39:31.86: [22428]: STATE CHANGE: SENDING -> MODEMWAIT (timeout
> 5)
> > Oct 17 07:39:31.86: [22428]: SESSION END
> >
> >
> > --
> > Pagarbiai  / Best Regards,
> > Giedrius Augys
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> Please post your iaxmodem config file.
>
> Jonn
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Pagarbiai  / Best Regards,
Giedrius Augys
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071017/eac88cd5/attachment-0001.htm