[asterisk-users] zaptel upgrade trouble (1.2.10 -> 1.2.20.1)

[Tzafrir Cohen]

On Tue, Oct 02, 2007 at 10:06:06AM +0200, Artifex Maximus wrote:
> Hello!
> 
> I have been trying upgrade zaptel from 1.2.10 to 1.2.20.1. I am using
> asterisk 1.2.10 with one TDM2400P (all 6 module in use) and one
> TE405P. When I upgrade to 1.2.20.1 the order of cards mess up and
> therefore zaptel.conf is unusable and gives error. Why is it happen
> and what do I need to change in zaptel.conf?
> 
> now zaptel.conf is:
> loadzone=hu
> defaultzone=hu
> # GSM
> fxsks=1-4
> # FAX
> fxoks=5-8
> # EXT
> fxoks=9-24
> # PRI
> span=2,1,0,ccs,hdb3,crc4
> bchan=25-39
> dchan=40
> bchan=41-55
> 
> zttool shows that my TDM is the first device and T4XXP is from second
> to fifth. Nice. After zaptel upgrade TDM is on the fifth position. And
> channels in zaptel.conf were messed up of course because 1-24 is not
> for TDM.

Was there also a change in the kernel ? 

In the value of MODULES in /etc/{sysconfig,default}/zaptel ?

-- 
               Tzafrir Cohen       
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir