[asterisk-users] Empty Wildcard TDM400P as a MeetMe timer.

[Steve Totaro]

Steve Totaro wrote:
> Henry Cobb wrote:
>> I've just moved into 3.3v PCI servers and found that my clone X100P
>> cards were lying about the 3.3v supported notch.
>>
>> Can I use a  Wildcard TDM400P without any modules as a timer for
>> MeetMe in a 64 bit 3.3v server?
>>
>> Will I still need to plug the hard disk power cable into it?
>>
>> Is there a better cheaper 3.3v MeetMe timer?  (Boss doesn't trust the
>> kernel timer.)
>>
>> -HJC
>> _______________________________________________
> The empty card will work but there is some trickery that must be 
> done.  I asked this same question about a year ago, some people said 
> it will not work and one person said it would and gave me the code 
> change.  It worked.  I forget what the change was but you should be 
> able to search the archives for my name plus empty tdm400p or 
> something like that.
>
> Thanks,
> Steve Totaro
It was a little harder to find than I thought so I will give you a link 
to the thread.

http://lists.digium.com/pipermail/asterisk-users/2006-May/151222.html

Thanks,
Steve Totaro
www.asteriskhelpdesk.com
KB3OPB