[asterisk-users] Asterisk 1.2 TDM24xx and B410P

[Tzafrir Cohen]

On Tue, Jul 03, 2007 at 12:04:08AM +0200, Administrator TOOTAI wrote:
> Tzafrir Cohen wrote:
> > On Mon, Jul 02, 2007 at 09:27:39PM +0200, Administrator TOOTAI wrote:
> >   
> >> We have an Ubuntu Dapper with 2.6.14 kernel, asterisk 1.2.14 debs from 
> >> http://pkg-voip.buildserver.net
> >>     
> >
> > Does it have misdn support?
> >   
> We add misdn support by compiling misdn1.1.4
> >   
> >> When misdn stuff (misdn-init start) is not started, everything is fine, 
> >> our 8 FXO (Channel 1-8) 4 FXS (21-24) are working well.
> >>
> >> If we start the misdn stuff (one card, port 1,2,3,4 in misdn-init.conf 
> >> and no TELCO cable plugged in the card),  the dialtone disappear on TDM 
> >> lines :-(
> >>     
> >
> > Hmmm.... is Asterisk running?
> >   
> Yes. But if we rmmod the wctdm24xxp module, modprobe it again, Asterisk 
> is not starting anymore we have to reboot it. Our problem is near the 
> one from the thread
> 
> "problem starting asterisk, unable to load chan_zap" opened by Sebastian 
> Reitenbach. We always get
> 
> Jun 13 13:05:41 WARNING[3356] chan_zap.c: Unable to specify channel 1: No 
> such device or address
> Jun 13 13:05:41 ERROR[3356] chan_zap.c: Unable to open channel 1: No such 
> device or address
> here = 0, tmp->channel = 1, channel = 1

Problems at the zaptel level.

cat /proc/zaptel/*

cat /etc/zaptel.conf

> Jun 13 13:05:41 ERROR[3356] chan_zap.c: Unable to register channel '1-2'
> Jun 13 13:05:41 WARNING[3356] loader.c: chan_zap.so: load_module failed, 
> returning -1
> Jun 13 13:05:41 DEBUG[3356] channel.c: Unregistering channel type 'Zap'
> Jun 13 13:05:41 WARNING[3356] loader.c: Loading module chan_zap.so failed!
> 
> 
> What is to notice is the <Unable to register channel '1-2'> Why those 
> two channels?

Take a look at /etc/asterisk/zapata.conf .

> > Do you have zaptel channels in Asterisk? Asterisk is the one providing
> > the dialtone.
> >
> > In short, what is the output of:
> >
> >   asterisk -rx 'zap show channels'
> >   
> The channels are showned as they should. From looking logs and commands 
> inside Asterisk, everything looks fine. Sorry to be not able to copy 
> output of the command, I can't connect to the server at this time. But 
> tht's one of the first thing I tested.
> >   
> >> Does someone has a similar working config? Is it a problem with asterisk 
> >> version (we prefere to follow the pkg-voip team)?
> >>
> >> Thanks for any hint or experience
> >>     
> >
> > The misdn packages shipped with Ubunntu are buggy (they were removed
> > from Debian Etch due to that reason). The Asterisk package is not built
> > with chan_misdn , IIRC.
> >   
> Ok, but compiling mISDN1.1.4 from misdn.org should do the trick ...
> -- 
> Daniel
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir