[asterisk-users] Asterisk 1.2 TDM24xx and B410P

[Administrator TOOTAI]

Tzafrir Cohen wrote:
> On Mon, Jul 02, 2007 at 09:27:39PM +0200, Administrator TOOTAI wrote:
>   
>> We have an Ubuntu Dapper with 2.6.14 kernel, asterisk 1.2.14 debs from 
>> http://pkg-voip.buildserver.net
>>     
>
> Does it have misdn support?
>   
We add misdn support by compiling misdn1.1.4
>   
>> When misdn stuff (misdn-init start) is not started, everything is fine, 
>> our 8 FXO (Channel 1-8) 4 FXS (21-24) are working well.
>>
>> If we start the misdn stuff (one card, port 1,2,3,4 in misdn-init.conf 
>> and no TELCO cable plugged in the card),  the dialtone disappear on TDM 
>> lines :-(
>>     
>
> Hmmm.... is Asterisk running?
>   
Yes. But if we rmmod the wctdm24xxp module, modprobe it again, Asterisk 
is not starting anymore we have to reboot it. Our problem is near the 
one from the thread

"problem starting asterisk, unable to load chan_zap" opened by Sebastian 
Reitenbach. We always get

Jun 13 13:05:41 WARNING[3356] chan_zap.c: Unable to specify channel 1: No 
such device or address
Jun 13 13:05:41 ERROR[3356] chan_zap.c: Unable to open channel 1: No such 
device or address
here = 0, tmp->channel = 1, channel = 1
Jun 13 13:05:41 ERROR[3356] chan_zap.c: Unable to register channel '1-2'
Jun 13 13:05:41 WARNING[3356] loader.c: chan_zap.so: load_module failed, 
returning -1
Jun 13 13:05:41 DEBUG[3356] channel.c: Unregistering channel type 'Zap'
Jun 13 13:05:41 WARNING[3356] loader.c: Loading module chan_zap.so failed!


What is to notice is the <Unable to register channel '1-2'> Why those 
two channels?
> Do you have zaptel channels in Asterisk? Asterisk is the one providing
> the dialtone.
>
> In short, what is the output of:
>
>   asterisk -rx 'zap show channels'
>   
The channels are showned as they should. From looking logs and commands 
inside Asterisk, everything looks fine. Sorry to be not able to copy 
output of the command, I can't connect to the server at this time. But 
tht's one of the first thing I tested.
>   
>> Does someone has a similar working config? Is it a problem with asterisk 
>> version (we prefere to follow the pkg-voip team)?
>>
>> Thanks for any hint or experience
>>     
>
> The misdn packages shipped with Ubunntu are buggy (they were removed
> from Debian Etch due to that reason). The Asterisk package is not built
> with chan_misdn , IIRC.
>   
Ok, but compiling mISDN1.1.4 from misdn.org should do the trick ...
-- 
Daniel