[asterisk-users] Asterisk 1.2 TDM24xx and B410P

[Matthew Fredrickson]

On Jul 2, 2007, at 6:02 PM, Tzafrir Cohen wrote:

> On Tue, Jul 03, 2007 at 12:04:08AM +0200, Administrator TOOTAI wrote:
>> Tzafrir Cohen wrote:
>>> On Mon, Jul 02, 2007 at 09:27:39PM +0200, Administrator TOOTAI  
>>> wrote:
>>>
>>>> We have an Ubuntu Dapper with 2.6.14 kernel, asterisk 1.2.14  
>>>> debs from
>>>> http://pkg-voip.buildserver.net
>>>>
>>>
>>> Does it have misdn support?
>>>
>> We add misdn support by compiling misdn1.1.4
>>>
>>>> When misdn stuff (misdn-init start) is not started, everything  
>>>> is fine,
>>>> our 8 FXO (Channel 1-8) 4 FXS (21-24) are working well.
>>>>
>>>> If we start the misdn stuff (one card, port 1,2,3,4 in misdn- 
>>>> init.conf
>>>> and no TELCO cable plugged in the card),  the dialtone disappear  
>>>> on TDM
>>>> lines :-(
>>>>
>>>
>>> Hmmm.... is Asterisk running?
>>>
>> Yes. But if we rmmod the wctdm24xxp module, modprobe it again,  
>> Asterisk
>> is not starting anymore we have to reboot it. Our problem is near the
>> one from the thread
>>
>> "problem starting asterisk, unable to load chan_zap" opened by  
>> Sebastian
>> Reitenbach. We always get
>>
>> Jun 13 13:05:41 WARNING[3356] chan_zap.c: Unable to specify  
>> channel 1: No
>> such device or address
>> Jun 13 13:05:41 ERROR[3356] chan_zap.c: Unable to open channel 1:  
>> No such
>> device or address
>> here = 0, tmp->channel = 1, channel = 1
>
> Problems at the zaptel level.
>
> cat /proc/zaptel/*
>
> cat /etc/zaptel.conf

That's what I would say as well.  Also, what's the output of dmesg  
when you releoad the card.


---
Matthew Fredrickson
Software Engineer
Digium, Inc.

>
>> Jun 13 13:05:41 ERROR[3356] chan_zap.c: Unable to register channel  
>> '1-2'
>> Jun 13 13:05:41 WARNING[3356] loader.c: chan_zap.so: load_module  
>> failed,
>> returning -1
>> Jun 13 13:05:41 DEBUG[3356] channel.c: Unregistering channel type  
>> 'Zap'
>> Jun 13 13:05:41 WARNING[3356] loader.c: Loading module chan_zap.so  
>> failed!
>>
>>
>> What is to notice is the <Unable to register channel '1-2'> Why those
>> two channels?
>
> Take a look at /etc/asterisk/zapata.conf .
>
>>> Do you have zaptel channels in Asterisk? Asterisk is the one  
>>> providing
>>> the dialtone.
>>>
>>> In short, what is the output of:
>>>
>>>   asterisk -rx 'zap show channels'
>>>
>> The channels are showned as they should. From looking logs and  
>> commands
>> inside Asterisk, everything looks fine. Sorry to be not able to copy
>> output of the command, I can't connect to the server at this time.  
>> But
>> tht's one of the first thing I tested.
>>>
>>>> Does someone has a similar working config? Is it a problem with  
>>>> asterisk
>>>> version (we prefere to follow the pkg-voip team)?
>>>>
>>>> Thanks for any hint or experience
>>>>
>>>
>>> The misdn packages shipped with Ubunntu are buggy (they were removed
>>> from Debian Etch due to that reason). The Asterisk package is not  
>>> built
>>> with chan_misdn , IIRC.
>>>
>> Ok, but compiling mISDN1.1.4 from misdn.org should do the trick ...
>> -- 
>> Daniel
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> -- 
>                Tzafrir Cohen
> icq#16849755                    jabber:tzafrir at jabber.org
> +972-50-7952406           mailto:tzafrir.cohen at xorcom.com
> http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users