[asterisk-users] no lights on TE405P, but shows up in lspci, modules loaded

[Wayne Jensen]

yes

On 1/31/07, C F <shmaltz at gmail.com> wrote:
> Is udev running?
>
> On 1/31/07, Wayne Jensen <wayne at srmarketresearch.com> wrote:
> > I pulled a working TE405P from one box and put it in another box.  I
> > compiled the zaptel modules, modprobe zaptel, modprobe wct4xxp, but no
> > lights on the card come on.
> >
> > I do an lspci and the card shows up there.
> >
> > I ran ztcfg -vv and got the error message Unable to open master device
> > '/dev/zap/ctl' so I followed the instructions in README.udev
> >
> > the error message went away, but now when I run ztcfg I just get "0
> > channels configured"
> >
> > Thanks!
> > Wayne