[asterisk-users] no lights on TE405P, but shows up in lspci, modules loaded

[C F]

Is udev running?

On 1/31/07, Wayne Jensen <wayne at srmarketresearch.com> wrote:
> I pulled a working TE405P from one box and put it in another box.  I
> compiled the zaptel modules, modprobe zaptel, modprobe wct4xxp, but no
> lights on the card come on.
>
> I do an lspci and the card shows up there.
>
> I ran ztcfg -vv and got the error message Unable to open master device
> '/dev/zap/ctl' so I followed the instructions in README.udev
>
> the error message went away, but now when I run ztcfg I just get "0
> channels configured"
>
> Thanks!
> Wayne
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>