[asterisk-users] no lights on TE405P, but shows up in lspci, modules loaded

[Tzafrir Cohen]

On Wed, Jan 31, 2007 at 08:40:59PM -0700, Wayne Jensen wrote:
> I pulled a working TE405P from one box and put it in another box.  I
> compiled the zaptel modules, modprobe zaptel, modprobe wct4xxp, but no
> lights on the card come on.
> 
> I do an lspci and the card shows up there.
> 
> I ran ztcfg -vv and got the error message Unable to open master device
> '/dev/zap/ctl' so I followed the instructions in README.udev
> 
> the error message went away, but now when I run ztcfg I just get "0
> channels configured"

Do you see relevant entries under /sys/class/zaptel ?

Later on, do you have /dev/zap/ctl ?

If you run ztcfg later, do you still get the same error?

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir