[asterisk-users] Asterisk 1.4 problem with ztdummy and MeetMe()

[Bill Gibbs]

Here is what he was getting at:

1.2.x and ztdummy and meetme all work fine.

However....

Compile Zaptel 1.4.0, install, reboot
Zttool shows ztdummy as the timing device.  Lsmod shows it loaded.

If you then compile Asterisk 1.4.0 it fails to compile app_meetme

My quick and dirty solution just now:
Removed the DEPENDS_app_meetme=ZAPTEL from the file menuselect.makedeps
And in menuselect.makeopts I removed the DEPSFAILED line that had meetme
in it.  It then compiled.

Bill


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Oded Arbel
Sent: Sunday, January 28, 2007 5:47 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk 1.4 problem with ztdummy and
MeetMe()

On Thu, 2007-01-25 at 18:40 +0100, Stefan Wintermeyer wrote:
> Hi,
> 
> when I build zaptel-1.2 and asterisk-1.2 I can modprobe ztdummy and  
> start asterisk to be able to use MeetMe().
> 
> When I build zaptel-1.4 and asterisk-1.4 I can modprobe ztdummy and  
> start asterisk but I am not able to use MeetMe().
> 
> What do I miss?

I'm not sure, because we missed the entire problem description, which I
would imaging would have included log snippets and/or error message
reports, but it was apparently removed from your e-mail.

http://www.catb.org/~esr/faqs/smart-questions.html

--
Oded Arbel
Atelis
oded at atelis.net
Tel: +972-54-7340014
::..
He's dead, Jim. You grab his wallet, I'll grab his tricorder.


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users