[asterisk-users] TDM400 hangup issue in China

[Rilawich Ango]

Try to increase the value of busycount.  It may help to solve the problem.

On Dec 14, 2007 10:47 PM, bilal ghayyad <bilmar_gh at yahoo.com> wrote:
> Hi All;
>
> For me, I am in Kuwait and using the TDM22B and I used
> all the below settings and did not resolve my problem,
> I do not know if there is any other settings, or if
> there is a method to detect that no signaling is still
> existed on the, so we can do Hanup, the below settings
> used and did not resovle the hangup problem:
>
> busydetect=yes
> busycount=3
> hanguponpolarityswitch=yes
>
> Any advise?
> Regards
> Bilal
>
> ---------------
> Thanks Steven and Giorgio that will work. There are a
> couple of other
> solutions depending on which telco you are connecting
> to and which
>  exchange
> they are using. E1 offers more issues than PSTN.
>
> We are one of Digium's distributors in Asia with full
> technical support
>  in
> China either out of our Hong Kong or Beijing offices.
> We have English
>  and
> Chinese speaking people.
>
> Rupert Utteridge
> Director - Sales & Marketing
> Digital Techniques (Asia) Limited
> Room 0209, Tower 2
> Beijing Bright China Chang An Building
> 7 Jianguomen Nei Avenue
> Beijing 100005
> People's Republic of China
>
> Mobile: +86 136 8146 9331
>
> Web: www.dtasia.net
> ---------------
>
>
> Thanks very much for the help Giorgio, I will give
> this a try today =)
>
>
> On Thu, 2007-12-13 at 11:40 +0100, gincantalupo wrote:
> > Hi Steven,
> > I do not live in China but I had the same problem.
> > Try these 2 params inside zapata.conf:
> >
> > busydetect = yes
> > hanguponpolarityswitch = yes
> >
> > It worked for me.
> >
> > Giorgio Incantalupo
> >
> > Steven O'Reilly wrote:
> > > Afternoon,
> > >
> > >     I was hoping someone could point me in the right
> direction.  I
>  have
> an
> > > asterisk PBX deployed in China using a TDM400P
> based card.  The
>  incoming
> > > calls are being picked up correctly, but are not
> being hung up.  I
> > > suspect that this might be an issue with the
> signaling that has
>  been
> > > selected.
> > >     If anyone here has deployed asterisk in china
> using an analog
>  card,
> it
> > > would be a great help to hear about the
> configuration used.
> > >
> > > Best regards,
> > > Steven O'Reilly
>
>
>
>       ____________________________________________________________________________________
> Never miss a thing.  Make Yahoo your home page.
> http://www.yahoo.com/r/hs
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>