[asterisk-users] Using Asterisk to connect 2 locations with legacy PBX

Marco Mouta marco.mouta at gmail.com
Mon Dec 10 07:50:41 CST 2007


Yes Asterisk feets your needs 100%.

You need 2 Asterisk each one with Telephony cards (ISDN or Analog) and I
would recommend you to setup an IAX trunk to interconnect both servers.

Each Asterisk will act as a Media Gateway.

Look for  IAX trunk over the wiki it's all there.

good luck.

Best regards,
Marco Mouta

On Dec 10, 2007 12:24 PM, Kovář Jan <jan-kovar at meggle.cz> wrote:

> Hello.
>
> I am going through the documentation and trying to find if asterisk can
> help me in my case. It is quite difficult to find answer because I do not
> know the exact question.
> I have two location. Each in different country. Both locations have
> Siemens HiPath - different type and software. I can not use card that would
> allow me to connect those PBXs using SIP. But I have some free ISDN and
> analog ports in both PBXs. Is it possible to use Asterisk on each side with
> some ISDN or analog card to connect to each PBX and enable users to call
> through the "asterisk shortcut"? The users would not dial +country code
> whole number, but for example 99 + internal number in second location to use
> Asterisk instead of conventional telecom line. Could this be done using
> Asterisk? What should I look for in documentation?
>
> Thank you
>
> Best regards
>
> Jan Kovář
> IT koordinátor
> ______________________________________________
> Meggle, s.r.o., Gotthardská 4/37, CZ-160 00 Praha 6
> tel +420 729 828 128
> fax +420 224 312 184
> gsm +420 724 112 882
> jan-kovar at meggle.cz
> www.meggle.cz
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Esta mensagem (incluindo quaisquer anexos) pode conter informação
confidencial para uso exclusivo do destinatário. Se não for o destinatário
pretendido, não deverá usar, distribuir ou copiar este e-mail. Se recebeu
esta mensagem por engano, por favor informe o emissor e elimine-a
imediatamente. Obrigado.

This e-mail message is intended only for individual(s) to whom it is
addressed and may contain information that is privileged, confidential,
proprietary, or otherwise exempt from disclosure under applicable law. If
you believe you have received this message in error, please advise the
sender by return e-mail and delete it from your mailbox. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071210/8c107523/attachment-0001.htm 


More information about the asterisk-users mailing list