[asterisk-users] Red Alarm TE420 with E1s - R2

[Tilghman Lesher]

On Monday 03 December 2007 12:40, Roger C. Beraldi Martins wrote:
> Thanks understood I will use this configurations for de last span. But
> I think the Carlos Chávez are right about this. I realy forgot to put
> jumpers to set E1 mode in TE420 card, if it's come with the jumpers
> open (and I believe this) probably this is the problem.
>
> I don't know what parameter must be put on the module load to make
> card up in E1 mode,  then tomorrow I will have physical access on the
> card and I will put all jumpers closed.

modprobe wct4xxp t1e1override=15

t1e1override is a bitwise parameter, 0 being all T1, 15 being all E1 and
numbers in between as different combinations of T1 and E1 for the various
ports.

-- 
Tilghman