[asterisk-users] Asterisk 1.2 + Zaptel 1.4 + HPEC = Crash?

Matthew Fredrickson creslin at digium.com
Sat Aug 25 10:39:52 CDT 2007


Trevor Peirce wrote:
> Hello,
> 
> Has anyone tried the combination of asterisk 1.2.24, zaptel 1.4.5 and 
> HPEC 9.00.003?

First of all... Why are you using zaptel 1.4.5 with asterisk 1.2?  That 
is a red flag in itself.

> 
> In particular, with a hardware configuration similar to:
> 
> Module 0: Installed -- AUTO FXO (FCC mode)
> Module 1: Installed -- AUTO FXO (FCC mode)
> Module 2: Installed -- AUTO FXO (FCC mode)
> Module 3: Not installed
> Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules)
> 
> I have two fully independent systems (both production, so I can't do 
> further testing unfortunately) that crash anywhere between an hour and a 
> day after booting under a minimal load.  If HPEC is disabled, the 
> problem is gone (but really bad echo).  If I use zaptel 1.2.20.1, the 
> problem is gone.
> 
> The result is a kernel panic followed by an automatic reboot.  Nothing 
> is written to log files so I cannot provide any debug information.  As 
> mentioned this has happened on multiple production machines and I do not 
> have any other "wctdm" cards to test with.
> 
> I would be curious to hear if anyone else noticed the same problem or if 
> they have it working.  What are the common denominators?
> 
> Thanks,
> Trevor
> 


-- 
Matthew Fredrickson
Software/Firmware Engineer
Digium, Inc.



More information about the asterisk-users mailing list