[asterisk-users] FSK callerid

Steve Murphy murf at parsetree.com
Wed Aug 8 12:40:15 CDT 2007


On Wed, 2007-08-08 at 23:55 +0900, Balgansuren Batsukh wrote:
> Hello,
> 
> I installed Asterisk on Dell Precision workstation and configured with 
> sample configuration.
> 
> I have two TDM400 board and one with 4xFXO and second one 4xFXS module 
> installed.
> 
> I made call to telephone line connected to FXO port and never seen callerid 
> on those lines.
> 
> I tested cidsignalling and cidstart types and all doesn't work.

Balgaa--

What country are you in? The CID conventions vary considerably from
country 
to country! Your tonezone indicate US/France...

Here in the US, the defaults in zapata.conf work fine for me:

usecallerid=yes

;cidsignalling=bell

;cidstart=ring

Are you sure your lines from the CO are providing CID? Out here where
I'm at,
the phone company charges extra for the privilege of CID.


murf

> 
> /var/log/messages:
> ============
> Aug  3 13:42:51 towerpbx kernel: Module 0: Installed -- AUTO FXO (FCC mode)
> Aug  3 13:42:51 towerpbx kernel: Module 1: Installed -- AUTO FXO (FCC mode)
> Aug  3 13:42:51 towerpbx kernel: Module 2: Installed -- AUTO FXO (FCC mode)
> Aug  3 13:42:51 towerpbx kernel: Module 3: Installed -- AUTO FXO (FCC mode)
> Aug  3 13:42:51 towerpbx kernel: input: ImPS/2 Logitech Wheel Mouse as 
> /class/input/input2
> Aug  3 13:42:51 towerpbx kernel: Found a Wildcard TDM: Wildcard TDM400P REV 
> I (4 modules)
> Aug  3 13:42:51 towerpbx kernel: ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 
> 17 (level, low) -> IRQ 185
> Aug  3 13:42:51 towerpbx kernel: Freshmaker version: 71
> Aug  3 13:42:51 towerpbx kernel: Freshmaker passed register test
> Aug  3 13:42:51 towerpbx kernel: Module 0: Installed -- AUTO FXS/DPO
> Aug  3 13:42:51 towerpbx kernel: Module 1: Installed -- AUTO FXS/DPO
> Aug  3 13:42:51 towerpbx kernel: Module 2: Installed -- AUTO FXS/DPO
> Aug  3 13:42:51 towerpbx kernel: Module 3: Installed -- AUTO FXS/DPO
> Aug  3 13:42:51 towerpbx kernel: Found a Wildcard TDM: Wildcard TDM400P REV 
> E/F (4 modules)
> Aug  3 13:42:51 towerpbx kernel: ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 
> 18 (level, low) -> IRQ 177
> Aug  3 13:42:51 towerpbx kernel: FALC version: 00000005
> Aug  3 13:42:51 towerpbx kernel: TE110P: Setting up global serial parameters 
> for T1 FALC V2.2
> Aug  3 13:42:51 towerpbx kernel: TE110P: Successfully initialized serial bus 
> for card
> Aug  3 13:42:51 towerpbx kernel: Found a Wildcard: Digium Wildcard TE110P 
> T1/E1
> Aug  3 13:42:51 towerpbx kernel: Registered tone zone 0 (United States / 
> North America)
> Aug  3 13:42:51 towerpbx kernel: Registered tone zone 2 (France)
> Aug  3 13:42:51 towerpbx kernel: Registered tone zone 0 (United States / 
> North America)
> Aug  3 13:42:51 towerpbx kernel: Registered tone zone 2 (France)
> 
> zapata.conf
> ========
> usecallerid=yes
> callerid=asreceived
> cidsignalling=dtmf
> cidstart=ring
> sendcalleridafter=1
> 
> Is there any to support FSK callerid?
> 
> How can I to debug callerid detection process on asterisk?
> 
> Regards,
> Balgaa
> 
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3239 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20070808/fc77a5e9/attachment.bin 


More information about the asterisk-users mailing list