[asterisk-users] FSK callerid

[Balgansuren Batsukh]

Hello,

I am from Mongolia and when I use telephone set with callerid it display
callerid.

Yes, our phone company charge for callerid service.

Balgaa

----- Original Message ----- 
From: "Steve Murphy" <murf at parsetree.com>
To: "Balgansuren Batsukh" <balgaa at micom.mn>; "Asterisk Users Mailing List -
Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Sent: Thursday, August 09, 2007 2:40 AM
Subject: Re: [asterisk-users] FSK callerid


On Wed, 2007-08-08 at 23:55 +0900, Balgansuren Batsukh wrote:
> Hello,
>
> I installed Asterisk on Dell Precision workstation and configured with
> sample configuration.
>
> I have two TDM400 board and one with 4xFXO and second one 4xFXS module
> installed.
>
> I made call to telephone line connected to FXO port and never seen
> callerid
> on those lines.
>
> I tested cidsignalling and cidstart types and all doesn't work.

Balgaa--

What country are you in? The CID conventions vary considerably from
country
to country! Your tonezone indicate US/France...

Here in the US, the defaults in zapata.conf work fine for me:

usecallerid=yes

;cidsignalling=bell

;cidstart=ring

Are you sure your lines from the CO are providing CID? Out here where
I'm at,
the phone company charges extra for the privilege of CID.


murf

>
> /var/log/messages:
> ============
> Aug  3 13:42:51 towerpbx kernel: Module 0: Installed -- AUTO FXO (FCC
> mode)
> Aug  3 13:42:51 towerpbx kernel: Module 1: Installed -- AUTO FXO (FCC
> mode)
> Aug  3 13:42:51 towerpbx kernel: Module 2: Installed -- AUTO FXO (FCC
> mode)
> Aug  3 13:42:51 towerpbx kernel: Module 3: Installed -- AUTO FXO (FCC
> mode)
> Aug  3 13:42:51 towerpbx kernel: input: ImPS/2 Logitech Wheel Mouse as
> /class/input/input2
> Aug  3 13:42:51 towerpbx kernel: Found a Wildcard TDM: Wildcard TDM400P
> REV
> I (4 modules)
> Aug  3 13:42:51 towerpbx kernel: ACPI: PCI Interrupt 0000:02:08.0[A] ->
> GSI
> 17 (level, low) -> IRQ 185
> Aug  3 13:42:51 towerpbx kernel: Freshmaker version: 71
> Aug  3 13:42:51 towerpbx kernel: Freshmaker passed register test
> Aug  3 13:42:51 towerpbx kernel: Module 0: Installed -- AUTO FXS/DPO
> Aug  3 13:42:51 towerpbx kernel: Module 1: Installed -- AUTO FXS/DPO
> Aug  3 13:42:51 towerpbx kernel: Module 2: Installed -- AUTO FXS/DPO
> Aug  3 13:42:51 towerpbx kernel: Module 3: Installed -- AUTO FXS/DPO
> Aug  3 13:42:51 towerpbx kernel: Found a Wildcard TDM: Wildcard TDM400P
> REV
> E/F (4 modules)
> Aug  3 13:42:51 towerpbx kernel: ACPI: PCI Interrupt 0000:02:09.0[A] ->
> GSI
> 18 (level, low) -> IRQ 177
> Aug  3 13:42:51 towerpbx kernel: FALC version: 00000005
> Aug  3 13:42:51 towerpbx kernel: TE110P: Setting up global serial
> parameters
> for T1 FALC V2.2
> Aug  3 13:42:51 towerpbx kernel: TE110P: Successfully initialized serial
> bus
> for card
> Aug  3 13:42:51 towerpbx kernel: Found a Wildcard: Digium Wildcard TE110P
> T1/E1
> Aug  3 13:42:51 towerpbx kernel: Registered tone zone 0 (United States /
> North America)
> Aug  3 13:42:51 towerpbx kernel: Registered tone zone 2 (France)
> Aug  3 13:42:51 towerpbx kernel: Registered tone zone 0 (United States /
> North America)
> Aug  3 13:42:51 towerpbx kernel: Registered tone zone 2 (France)
>
> zapata.conf
> ========
> usecallerid=yes
> callerid=asreceived
> cidsignalling=dtmf
> cidstart=ring
> sendcalleridafter=1
>
> Is there any to support FSK callerid?
>
> How can I to debug callerid detection process on asterisk?
>
> Regards,
> Balgaa
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users