[asterisk-users] FSK callerid

[Balgansuren Batsukh]

Hello,

I installed Asterisk on Dell Precision workstation and configured with 
sample configuration.

I have two TDM400 board and one with 4xFXO and second one 4xFXS module 
installed.

I made call to telephone line connected to FXO port and never seen callerid 
on those lines.

I tested cidsignalling and cidstart types and all doesn't work.

/var/log/messages:
============
Aug  3 13:42:51 towerpbx kernel: Module 0: Installed -- AUTO FXO (FCC mode)
Aug  3 13:42:51 towerpbx kernel: Module 1: Installed -- AUTO FXO (FCC mode)
Aug  3 13:42:51 towerpbx kernel: Module 2: Installed -- AUTO FXO (FCC mode)
Aug  3 13:42:51 towerpbx kernel: Module 3: Installed -- AUTO FXO (FCC mode)
Aug  3 13:42:51 towerpbx kernel: input: ImPS/2 Logitech Wheel Mouse as 
/class/input/input2
Aug  3 13:42:51 towerpbx kernel: Found a Wildcard TDM: Wildcard TDM400P REV 
I (4 modules)
Aug  3 13:42:51 towerpbx kernel: ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 
17 (level, low) -> IRQ 185
Aug  3 13:42:51 towerpbx kernel: Freshmaker version: 71
Aug  3 13:42:51 towerpbx kernel: Freshmaker passed register test
Aug  3 13:42:51 towerpbx kernel: Module 0: Installed -- AUTO FXS/DPO
Aug  3 13:42:51 towerpbx kernel: Module 1: Installed -- AUTO FXS/DPO
Aug  3 13:42:51 towerpbx kernel: Module 2: Installed -- AUTO FXS/DPO
Aug  3 13:42:51 towerpbx kernel: Module 3: Installed -- AUTO FXS/DPO
Aug  3 13:42:51 towerpbx kernel: Found a Wildcard TDM: Wildcard TDM400P REV 
E/F (4 modules)
Aug  3 13:42:51 towerpbx kernel: ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 
18 (level, low) -> IRQ 177
Aug  3 13:42:51 towerpbx kernel: FALC version: 00000005
Aug  3 13:42:51 towerpbx kernel: TE110P: Setting up global serial parameters 
for T1 FALC V2.2
Aug  3 13:42:51 towerpbx kernel: TE110P: Successfully initialized serial bus 
for card
Aug  3 13:42:51 towerpbx kernel: Found a Wildcard: Digium Wildcard TE110P 
T1/E1
Aug  3 13:42:51 towerpbx kernel: Registered tone zone 0 (United States / 
North America)
Aug  3 13:42:51 towerpbx kernel: Registered tone zone 2 (France)
Aug  3 13:42:51 towerpbx kernel: Registered tone zone 0 (United States / 
North America)
Aug  3 13:42:51 towerpbx kernel: Registered tone zone 2 (France)

zapata.conf
========
usecallerid=yes
callerid=asreceived
cidsignalling=dtmf
cidstart=ring
sendcalleridafter=1

Is there any to support FSK callerid?

How can I to debug callerid detection process on asterisk?

Regards,
Balgaa