[asterisk-users] ZAPTEL PROBLEM
Tzafrir Cohen
tzafrir.cohen at xorcom.com
Mon Apr 30 11:17:22 MST 2007
On Mon, Apr 30, 2007 at 12:25:07PM -0500, Diego Quintana Cruz wrote:
> Hi all,
> I am using a TDM400P card with 2 FXS and 2 FXO modules. Everything
> seems nice, but i'm not able to make calls nor to receive any. When I
> try to make a call, I keep receiven the "all circuits are busy now"
> message, and when I receive calls, asterisk doesn't seems to care
> (don't get anything on the CLI)
set verbose 3 ?
Call from where? To where?
Do you see the relevant channel as offhook in 'zap show channel N' ?
Sanity check:
asterisk -rx 'show channels'
(hmm... asterisk -n -rx 'show channels' hangs for you as well?)
>
> I'm using Asterisk 1.2.17 and Zaptel 1.2.16 from Xorcom's repository
asterisk-classic or asterisk-bristuff?
>
> voip:~# asterisk -rx 'zap show status'
> Description Alarms IRQ bpviol
> CRC4
> Wildcard TDM400P REV I Board 1 OK 0 0 0
>
> voip:~# asterisk -rx 'zap show channels'
> Chan Extension Context Language MusicOnHold
> pseudo from-internal es
> 1 from-internal es
> 2 from-internal es
> 3 from-pstn es
> 4 from-pstn es
>
> I thought it could be an IRQ problem, but everything seems fine
>
> voip:~# cat /proc/interrupts
> CPU0
> 0: 118621819 XT-PIC timer
> 1: 811 XT-PIC i8042
> 2: 0 XT-PIC cascade
> 5: 0 XT-PIC uhci_hcd:usb3, via82cxxx
> 6: 5 XT-PIC floppy
> 7: 0 XT-PIC parport0
> 8: 1 XT-PIC rtc
> 9: 0 XT-PIC acpi
> 10: 2879759 XT-PIC uhci_hcd:usb2, eth0
> 11: 3048189 XT-PIC uhci_hcd:usb1, eth1
> 12: 474378440 XT-PIC ehci_hcd:usb4, wctdm
ehci_hcd:usb4 does normally take all the USB interrupts. However this
issue is probably not related to missed interrupts , if there are any.
> 14: 1074418 XT-PIC ide0
> 15: 4239765 XT-PIC ide1
> NMI: 0
> LOC: 0
> ERR: 0
> MIS: 0
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir at jabber.org
+972-50-7952406 mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir
More information about the asterisk-users
mailing list