[asterisk-users] ZAPTEL PROBLEM

[Diego Quintana Cruz]

Hi all,
I am using a TDM400P card with 2 FXS and 2 FXO modules. Everything
seems nice, but i'm not able to make calls nor to receive any. When I
try to make a call, I keep receiven the "all circuits are busy now"
message, and when I receive calls, asterisk doesn't seems to care
(don't get anything on the CLI)

I'm using Asterisk 1.2.17 and Zaptel 1.2.16 from Xorcom's repository

voip:~# asterisk -rx 'zap show status'
Description                              Alarms     IRQ        bpviol     CRC4
Wildcard TDM400P REV I Board 1           OK         0          0          0

voip:~# asterisk -rx 'zap show channels'
   Chan Extension  Context         Language   MusicOnHold
 pseudo            from-internal   es
      1            from-internal   es
      2            from-internal   es
      3            from-pstn       es
      4            from-pstn       es

I thought it could be an IRQ problem, but everything seems fine

voip:~# cat /proc/interrupts
           CPU0
  0:  118621819          XT-PIC  timer
  1:        811          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  5:          0          XT-PIC  uhci_hcd:usb3, via82cxxx
  6:          5          XT-PIC  floppy
  7:          0          XT-PIC  parport0
  8:          1          XT-PIC  rtc
  9:          0          XT-PIC  acpi
 10:    2879759          XT-PIC  uhci_hcd:usb2, eth0
 11:    3048189          XT-PIC  uhci_hcd:usb1, eth1
 12:  474378440          XT-PIC  ehci_hcd:usb4, wctdm
 14:    1074418          XT-PIC  ide0
 15:    4239765          XT-PIC  ide1
NMI:          0
LOC:          0
ERR:          0
MIS:          0

Hope you can help me with my problem.
-- 
Diego Quintana a.k.a. RouterMaN
Ingeniero de las Telecomunicaciones
Linux Registered User #382615 - http://counter.li.org/
SIP # 1-747-633-6676 Ext. 1011
FWD # 764839 Ext. 1011
http://routerman.blogsome.com
http://gst.telecom.pucp.edu.pe