[asterisk-users] E&M Wink start problem

[Barton Fisher]

We use E&M wink here: Basically we have asterisk talking to dialogic 
cards, but shouldn't be much different to a PBX

zaptel.conf
# Span 1: TE4/0/1 "TE410P (PCI) Card 0 Span 1" AMI/D4 RED
span=1,0,0,d4,ami
e&m=1-24

zapata.conf
signalling =>em_w
context=from-pstn
group = 1
channel => 1-24

for examples

Bart

Timothy McKee wrote:
> Attempting to talk to an Eagle Telephonics switch at a disaster 
> exercise.  Didn't think a plain old E&M wink start T1 would be this 
> much of an issue. 
>
> We finally got the Eagle to accept a call from *, but whilst I can 
> hear the person on the Eagle, they can't hear me.  When they initiate 
> a dial out I only get the first 2 digits from their switch...
>
> Does anyone have decent sample E&M Wink start configs for the Digium 
> cards and * ?  Any suggestions on the Eagle side?
>
> Has anyone 
> =============
> Timothy McKee
> VP, Network Services
> SDN Global
> +1-704-587-4829 work
> +1-704-587-4830 NOCC
>
>
>
>
>
> __________ NOD32 2216 (20070424) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> __________ NOD32 2216 (20070424) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>