[asterisk-users] BeroNet HFC-4S card is now detected as only 2 ports

[Henrik Woffinden]

Tzafrir Cohen wrote:
> On Fri, Apr 06, 2007 at 01:18:24AM +0200, Henrik Woffinden wrote:
>   
>> Hello list,
>>
>> After upgrading from BRIstuff 1y-b to 1y-e my ISDN card is suddently
>> detected as 2 ports instead of 4.
>>
>> I still load the driver as "modprobe qozap ports=12" as I've always
>> done. But now it only sees 2 ports.
>> Output of "lspci -vvv"
>> ------ cut --------
>> 02:01.0 ISDN controller: Cologne Chip Designs GmbH ISDN network
>> Controller [HFC-4S] (rev 01)
>>         Subsystem: Cologne Chip Designs GmbH Unknown device b560
>>         Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B-
>>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR-
>>         Interrupt: pin A routed to IRQ 22
>>         Region 0: I/O ports at ddb8 [size=8]
>>         Region 1: Memory at fcefa000 (32-bit, non-prefetchable) [size=4K]
>>         Capabilities: [40] Power Management version 2
>>                 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
>> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> ------ cut --------
>>     
>
> Just a comment: the CHANGES file has the item "fixed detection of
> miniPCI cards (qozap)". Take a look at the diff between qozap/qozap.c
> in -d and in -e .
>
>   
Problem solved...

If anyone else is interested, here is what I changed to make it work
with a BeroNet HFC-4S rev 01 card:

Patch file:
-------- cut --------
297a298,299
>       } else if (qoztmp->type == 0xb560) {
>           qoz_outb(qoztmp,qoz_R_BRG_PCM_CFG,0x23);
1584c1586
<           if ((tmp->subsystem_device <= 0xb555) ||
(tmp->subsystem_device == 0xb558)) {
---
>           if ((tmp->subsystem_device <= 0xb555) ||
(tmp->subsystem_device == 0xb558) || (tmp->subsystem_device == 0xb560)) {
1638a1641
>               case 0xb560:
-------- cut ---------

I don't know how to make it into a correct patchfile, so if someone else
knows that, it could be done and maybe placed where everybody could get it.
---
Best regards,

Henrik Woffinden