[asterisk-users] BeroNet HFC-4S card is now detected as only 2 ports

[Tzafrir Cohen]

On Sat, Apr 07, 2007 at 12:17:03PM +0200, Henrik Woffinden wrote:
> Tzafrir Cohen wrote:
> > On Fri, Apr 06, 2007 at 01:18:24AM +0200, Henrik Woffinden wrote:
> >   
> >> Hello list,
> >>
> >> After upgrading from BRIstuff 1y-b to 1y-e my ISDN card is suddently
> >> detected as 2 ports instead of 4.
> >>
> >> I still load the driver as "modprobe qozap ports=12" as I've always
> >> done. But now it only sees 2 ports.
> >> Output of "lspci -vvv"
> >> ------ cut --------
> >> 02:01.0 ISDN controller: Cologne Chip Designs GmbH ISDN network
> >> Controller [HFC-4S] (rev 01)
> >>         Subsystem: Cologne Chip Designs GmbH Unknown device b560
> >>         Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> >> ParErr- Stepping- SERR- FastB2B-
> >>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> >> <TAbort- <MAbort- >SERR- <PERR-
> >>         Interrupt: pin A routed to IRQ 22
> >>         Region 0: I/O ports at ddb8 [size=8]
> >>         Region 1: Memory at fcefa000 (32-bit, non-prefetchable) [size=4K]
> >>         Capabilities: [40] Power Management version 2
> >>                 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> >> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> >>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >> ------ cut --------
> >>     
> >
> > Just a comment: the CHANGES file has the item "fixed detection of
> > miniPCI cards (qozap)". Take a look at the diff between qozap/qozap.c
> > in -d and in -e .
> >
> >   
> Problem solved...
> 
> If anyone else is interested, here is what I changed to make it work
> with a BeroNet HFC-4S rev 01 card:
> 
> Patch file:
> -------- cut --------
> 297a298,299
> >       } else if (qoztmp->type == 0xb560) {
> >           qoz_outb(qoztmp,qoz_R_BRG_PCM_CFG,0x23);
> 1584c1586
> <           if ((tmp->subsystem_device <= 0xb555) ||
> (tmp->subsystem_device == 0xb558)) {
> ---
> >           if ((tmp->subsystem_device <= 0xb555) ||
> (tmp->subsystem_device == 0xb558) || (tmp->subsystem_device == 0xb560)) {
> 1638a1641
> >               case 0xb560:
> -------- cut ---------
> 
> I don't know how to make it into a correct patchfile, so if someone else
> knows that, it could be done and maybe placed where everybody could get it.

Simply use 'diff -u' instead of 'diff' .

Any idea if this can break anything?

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir