[asterisk-users] Problems with TE110P

Mon Apr 2 16:59:19 MST 2007

OK I now have 

MODULES:=zaptel wcte12xp

In my makefile and the driver loads but the card still fails.

lsmod | grep -i wct
wcte12xp               39360  0
zaptel                184996  1 wcte12xp

ztcfg -vv
Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'

1 error(s) detected

Not sure what this means.  Hopefully someone can shed some light.

cat /proc/zaptel/*
Span 1: WCT1/0 "Wildcard TE12xP Card 0"
        IRQ misses: 34

           1 WCT1/0/1
           2 WCT1/0/2
           3 WCT1/0/3
           4 WCT1/0/4
           5 WCT1/0/5
           6 WCT1/0/6
           7 WCT1/0/7
           8 WCT1/0/8
           9 WCT1/0/9
          10 WCT1/0/10
          11 WCT1/0/11
          12 WCT1/0/12
          13 WCT1/0/13
          14 WCT1/0/14
          15 WCT1/0/15
          16 WCT1/0/16
          17 WCT1/0/17
          18 WCT1/0/18
          19 WCT1/0/19
          20 WCT1/0/20
          21 WCT1/0/21
          22 WCT1/0/22
          23 WCT1/0/23
          24 WCT1/0/24
          25 WCT1/0/25
          26 WCT1/0/26
          27 WCT1/0/27
          28 WCT1/0/28
          29 WCT1/0/29
          30 WCT1/0/30
          31 WCT1/0/31

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
Klaverstyn, David C
Sent: Tuesday, 3 April 2007 9:30 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [asterisk-users] Problems with TE110P

>From what I can tell the Zaptel 1.2.16 does not have a driver for the
TE120P.  Is this correct and if so how do I get it?

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric
"ManxPower" Wieling
Sent: Tuesday, 3 April 2007 9:11 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Problems with TE110P

That information is listed in the README file that comes with the Zaptel

source code.

Klaverstyn, David C wrote:
> What is the driver for the TE120P
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kevin P.
> Fleming
> Sent: Monday, 2 April 2007 10:59 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Problems with TE110P
> 
> Klaverstyn, David C wrote:
>> Lspci does show:
>> 03:02.0 Ethernet controller: Digium, Inc.: Unknown device 0120 (rev
> 11)
> 
> You have a TE120P, not a TE110P, so you are loading the wrong driver
> module.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users