[asterisk-users] Problems with TE110P

[Gustavo Cordeiro]

  Permissions?

Sds,
Gustavo


>From: "Klaverstyn, David C" <David.Klaverstyn at intergraph.com>
>Reply-To: Asterisk Users Mailing List - Non-Commercial 
>Discussion<asterisk-users at lists.digium.com>
>To: "Asterisk Users Mailing List - Non-Commercial 
>Discussion"<asterisk-users at lists.digium.com>
>Subject: RE: [asterisk-users] Problems with TE110P
>Date: Tue, 3 Apr 2007 09:59:19 +1000
>
>OK I now have
>
>MODULES:=zaptel wcte12xp
>
>In my makefile and the driver loads but the card still fails.
>
>
>lsmod | grep -i wct
>wcte12xp               39360  0
>zaptel                184996  1 wcte12xp
>
>
>
>ztcfg -vv
>Notice: Configuration file is /etc/zaptel.conf
>line 0: Unable to open master device '/dev/zap/ctl'
>
>1 error(s) detected
>
>
>Not sure what this means.  Hopefully someone can shed some light.
>
>cat /proc/zaptel/*
>Span 1: WCT1/0 "Wildcard TE12xP Card 0"
>         IRQ misses: 34
>
>            1 WCT1/0/1
>            2 WCT1/0/2
>            3 WCT1/0/3
>            4 WCT1/0/4
>            5 WCT1/0/5
>            6 WCT1/0/6
>            7 WCT1/0/7
>            8 WCT1/0/8
>            9 WCT1/0/9
>           10 WCT1/0/10
>           11 WCT1/0/11
>           12 WCT1/0/12
>           13 WCT1/0/13
>           14 WCT1/0/14
>           15 WCT1/0/15
>           16 WCT1/0/16
>           17 WCT1/0/17
>           18 WCT1/0/18
>           19 WCT1/0/19
>           20 WCT1/0/20
>           21 WCT1/0/21
>           22 WCT1/0/22
>           23 WCT1/0/23
>           24 WCT1/0/24
>           25 WCT1/0/25
>           26 WCT1/0/26
>           27 WCT1/0/27
>           28 WCT1/0/28
>           29 WCT1/0/29
>           30 WCT1/0/30
>           31 WCT1/0/31
>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
>Klaverstyn, David C
>Sent: Tuesday, 3 April 2007 9:30 AM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: RE: [asterisk-users] Problems with TE110P
>
> >From what I can tell the Zaptel 1.2.16 does not have a driver for the
>TE120P.  Is this correct and if so how do I get it?
>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric
>"ManxPower" Wieling
>Sent: Tuesday, 3 April 2007 9:11 AM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: Re: [asterisk-users] Problems with TE110P
>
>That information is listed in the README file that comes with the Zaptel
>
>source code.
>
>Klaverstyn, David C wrote:
> > What is the driver for the TE120P
> >
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com
> > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kevin P.
> > Fleming
> > Sent: Monday, 2 April 2007 10:59 PM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: Re: [asterisk-users] Problems with TE110P
> >
> > Klaverstyn, David C wrote:
> >> Lspci does show:
> >> 03:02.0 Ethernet controller: Digium, Inc.: Unknown device 0120 (rev
> > 11)
> >
> > You have a TE120P, not a TE110P, so you are loading the wrong driver
> > module.
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>asterisk-users mailing list
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>asterisk-users mailing list
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>asterisk-users mailing list
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

_________________________________________________________________
Verificador de Segurança do Windows Live OneCare: combata já vírus e outras 
ameaças! http://onecare.live.com/site/pt-br/default.htm