[asterisk-users] Problems with TE110P

[Klaverstyn, David C]

>From what I can tell the Zaptel 1.2.16 does not have a driver for the
TE120P.  Is this correct and if so how do I get it?

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric
"ManxPower" Wieling
Sent: Tuesday, 3 April 2007 9:11 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Problems with TE110P

That information is listed in the README file that comes with the Zaptel

source code.

Klaverstyn, David C wrote:
> What is the driver for the TE120P
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kevin P.
> Fleming
> Sent: Monday, 2 April 2007 10:59 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Problems with TE110P
> 
> Klaverstyn, David C wrote:
>> Lspci does show:
>> 03:02.0 Ethernet controller: Digium, Inc.: Unknown device 0120 (rev
> 11)
> 
> You have a TE120P, not a TE110P, so you are loading the wrong driver
> module.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users