[asterisk-users] Asterisk / Patton SmartNode SN2400 Strangeness FYI

[Eric "ManxPower" Wieling]

You should never have callerid="xxyyzz" as some devices (as you just 
discovered) choke on the " since that is not a valid Caller*ID 
character.  I think some versions of the Cisco phone SIP firmware also 
has a similar problem.


George Pajari wrote:
> Just a short problem description/resolution so others do not have to 
> experience the same frustration and lost hours.
> 
> Set Up: Sipura devices (various, mostly SPA2100, SPA2102) connecting to 
> an Asterisk box (1.2.4). Asterisk box talks to a Patton SmartNode SN2400 
> SIP/PRI gateway.
> 
> Inbound calls work fine.
> Outbound calls work fine from some units, not others.
> 
> Problem: if sip.conf contains callerid=xxyyzz it works; if it contains 
> callerid="xxyyzz" then the SN2400 accepts the SIP INVITE but refuses to 
> handle it.
> 
> Do not have the patience, time, or inclination to run more SIP debugs to 
> see exactly what is happening -- just posting this in the hope it might 
> help someone somewhere.
>