[asterisk-users] No dialtone, just directly busy

[Henrik Woffinden]

That's exactly what happens:

When I pick up the handle, this is what I get:
     -- Extension 's' in context 'from-inside' from '11' does not
exist.  Rejecting call on channel 0/2, span 2

Do you know what to do in the dialplan?

Best regards,

Henrik Woffinden



Tim St. Pierre wrote:
> Could you send us some CLI output?
>
> Look for something like this
>
> Invalid extension "s" in context <whatever your dial context is>
>
> It could be that lifting the handset without dialing is opening a channel to 
> the "s" extension, since there are no digits being dialed.  There is a 
> workaround for this, but it means creating a dialplan that produces dialtone 
> and waits for digits.  
>
> -Tim
>
>
> On September 8, 2006 14:44, Henrik Woffinden wrote:
>   
>> Hi,
>>
>> I'm using Asterisk 1.2.10-BRIstuffed-0.3.0-PRE-1s.
>> I've got 3 ISDN phones attached.
>>
>> When I want to dial out I can do it in 2 ways..
>>     1) Type in number with handle still on.. Lift handle and we dial the
>> number
>>     2) Lift handle and then press the number
>>
>> Both methods should work, but only the first does.
>> With the second I expected a dialtone but it goes immedately to busy
>> signal. No dialtone first.
>> Why is that?
>>     
>
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>