[asterisk-users] No dialtone, just directly busy

[Tim St. Pierre]

Could you send us some CLI output?

Look for something like this

Invalid extension "s" in context <whatever your dial context is>

It could be that lifting the handset without dialing is opening a channel to 
the "s" extension, since there are no digits being dialed.  There is a 
workaround for this, but it means creating a dialplan that produces dialtone 
and waits for digits.  

-Tim


On September 8, 2006 14:44, Henrik Woffinden wrote:
> Hi,
>
> I'm using Asterisk 1.2.10-BRIstuffed-0.3.0-PRE-1s.
> I've got 3 ISDN phones attached.
>
> When I want to dial out I can do it in 2 ways..
>     1) Type in number with handle still on.. Lift handle and we dial the
> number
>     2) Lift handle and then press the number
>
> Both methods should work, but only the first does.
> With the second I expected a dialtone but it goes immedately to busy
> signal. No dialtone first.
> Why is that?

-- 
Tim St. Pierre

IP telephony specialist
sip://5101@communicatefreely.net
Toronto: 647 722 6930
Toll-Free 1 888 488 6940
tim at communicatefreely.net
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060908/5a7c806a/attachment.pgp