[asterisk-users] No dialtone, just directly busy

[Eric "ManxPower" Wieling]

Remove immediate=yes from /etc/asterisk/zapata.conf

Henrik Woffinden wrote:
> That's exactly what happens:
> 
> When I pick up the handle, this is what I get:
>      -- Extension 's' in context 'from-inside' from '11' does not
> exist.  Rejecting call on channel 0/2, span 2
> 
> Do you know what to do in the dialplan?
> 
> Best regards,
> 
> Henrik Woffinden
> 
> 
> 
> Tim St. Pierre wrote:
>> Could you send us some CLI output?
>>
>> Look for something like this
>>
>> Invalid extension "s" in context <whatever your dial context is>
>>
>> It could be that lifting the handset without dialing is opening a channel to 
>> the "s" extension, since there are no digits being dialed.  There is a 
>> workaround for this, but it means creating a dialplan that produces dialtone 
>> and waits for digits.  
>>
>> -Tim
>>
>>
>> On September 8, 2006 14:44, Henrik Woffinden wrote:
>>   
>>> Hi,
>>>
>>> I'm using Asterisk 1.2.10-BRIstuffed-0.3.0-PRE-1s.
>>> I've got 3 ISDN phones attached.
>>>
>>> When I want to dial out I can do it in 2 ways..
>>>     1) Type in number with handle still on.. Lift handle and we dial the
>>> number
>>>     2) Lift handle and then press the number
>>>
>>> Both methods should work, but only the first does.
>>> With the second I expected a dialtone but it goes immedately to busy
>>> signal. No dialtone first.
>>> Why is that?
>>>     
>>   
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>   
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>