[asterisk-users] Diva server 4bri and Portuguese BRI

[Pedro Silva]

Hello,

One problem is solved and another appears... :(
I cannot receive incoming calls on trixbox. I defined one incoming
route (any DID/any CID) and forwading these calls to a SIP extension.
With capi and sip debug in "asterisk -r" console i dont detect any
incoming activity...
In xlog console i have the following debug:
  0:1898:127 - SIG-R(034) 08 01 0D 05 A1 04 03 80 90 A3 18 01 81 6C 0B
00 83 39 36 33 30 34 35 37 32 33 70 02 81 30 7D 02 91 81
                     Q.931  CR0d SETUP
                            Sending complete
                            Bearer Capability 80 90 a3
                            Channel Id 81
                            Calling Party Number 00 83 '963045723'
                            Called Party Number 81 '0'
                            HLC 91 81
    0:1898:127 - SIG-S 0->6 e:805
    0:1898:130 - CREATEID ok: context:1f assigned Id:3 freeIds=ec
    0:1898:130 - alloc cr in use =4
    0:1898:133 - SIG-X(008) 08 01 8D 45 08 02 80 95
                     Q.931  CR8d DISC
                            Cause 80 95 'Call rejected'
    0:1898:133 - SIG-x(008) 08 01 8D 5A 08 02 80 D8
                     Q.931  CR8d REL_COM
                            Cause 80 d8 'Incompatible destination'
    0:1898:133 - SIG-S 6->0 e:8c5
    0:1898:134 - D-X(012) 00 01 14 16 08 01 8D 5A 08 02 80 D8
    0:1898:135 - free cr in use =3
    0:1898:135 - DELETEID ok: deleted Id:4 freeIds=ec
    0:1898:155 - D-R(004) 00 01 01 16

So the problem appears to be "Incompatible destination"... but is
problem in asterisk or is before asterisk, on diva card...?

Tanks by any possible help!
Best regards,
PS.

2006/10/29, Pedro Silva <pedromsilva1 at gmail.com>:
> Finally this works!!! :)
> Tanks to Alberto and Marco by your help!
> The problems are:
> - the cable was connected to the wong card port... :(
> - the card config needs to be: ETSI; TE; Point-to-Point (I thought
> that was point-to-multipoint).
>
> Best regards,
> PS.
>
> 2006/10/29, Pedro Silva <pedromsilva1 at gmail.com>:
> > Hello again Alberto!
> >
> > > Anyway, to get more info, try to open a second shell
> > > and run /usr/lib/eicon/divas/xlog
> > > then on the first shell redo the telsampl test, then
> > > post the output of xlog off the list to my address
> > > (alberto at msoft-italia.com)
> >
> > This is the xlog output:
> > 4:1736:074 - CREATEID ok: context:1f assigned Id:6 freeIds=eb
> >     4:1736:074 - alloc cr in use =4
> >     4:1736:076 - free cr in use =3
> >     4:1736:077 - DELETEID ok: deleted Id:6 freeIds=eb
> >     4:1736:078 - CREATEID ok: context:1f assigned Id:6 freeIds=eb
> >     4:1736:078 - alloc cr in use =4
> >     4:1736:080 - free cr in use =3
> >     4:1736:080 - DELETEID ok: deleted Id:6 freeIds=eb
> >     4:1736:081 - CREATEID ok: context:1f assigned Id:6 freeIds=eb
> >     4:1736:081 - alloc cr in use =4
> >     4:1736:083 - [1,0] dsp_assign 0016, 0, 2048
> >     4:1736:083 - [1,0] CAI[00] 16 00 00 00 00 08
> >     4:1736:084 - [1,0] Download 532 requested
> >     4:1736:084 - MORE
> >     4:1736:085 - SIG-X(029) 08 01 36 05 A1 04 03 80 90 A3 18 01 83 1E
> > 02 80 83 70 0A 80 39 36 33 30 34 35 37 32 33
> >                      Q.931  CR36 SETUP
> >                             Sending complete
> >                             Bearer Capability 80 90 a3
> >                             Channel Id 83
> >                             Progress Indicator 80 83
> >                             Called Party Number 80 '963045723'
> >     4:1736:085 - SIG-S 0->1 e:885
> >     4:1736:087 - ACTIVATION_REQ
> >     4:1744:147 - L1_DOWN
> >     4:1744:150 - SIG-EVENT FFFF 08
> >
> >     4:1744:150 - SIG-EVENT FFFF 08
> >
> >     4:1744:150 - EVENT: Call failed in State 'Call initiated'
> >                      Link disconnected, Layer-1 error (cable or NT)
> >     4:1744:150 - SIG-S 1->0 e:ffff
> >     4:1744:151 - [1,0] dsp_release
> >     4:1744:155 - free cr in use =3
> >     4:1744:156 - DELETEID ok: deleted Id:6 freeIds=eb
> >
> > I disconnect the rj45 cable from alcatel pbx and connect that to the
> > diva card (with alcatel pbx i can make calls normally). The green led
> > of the diva card is activated when i connect the cable. So i dont
> > understand why the message " Link disconnected, Layer-1 error (cable
> > or NT)"...
> > This debug is th same if the cable is connected to the NT or not.
> > Any ideas...? Thanks!
> > PS.
> >
>