[asterisk-users] Diva server 4bri and Portuguese BRI

[Pedro Silva]

Finally this works!!! :)
Tanks to Alberto and Marco by your help!
The problems are:
- the cable was connected to the wong card port... :(
- the card config needs to be: ETSI; TE; Point-to-Point (I thought
that was point-to-multipoint).

Best regards,
PS.

2006/10/29, Pedro Silva <pedromsilva1 at gmail.com>:
> Hello again Alberto!
>
> > Anyway, to get more info, try to open a second shell
> > and run /usr/lib/eicon/divas/xlog
> > then on the first shell redo the telsampl test, then
> > post the output of xlog off the list to my address
> > (alberto at msoft-italia.com)
>
> This is the xlog output:
> 4:1736:074 - CREATEID ok: context:1f assigned Id:6 freeIds=eb
>     4:1736:074 - alloc cr in use =4
>     4:1736:076 - free cr in use =3
>     4:1736:077 - DELETEID ok: deleted Id:6 freeIds=eb
>     4:1736:078 - CREATEID ok: context:1f assigned Id:6 freeIds=eb
>     4:1736:078 - alloc cr in use =4
>     4:1736:080 - free cr in use =3
>     4:1736:080 - DELETEID ok: deleted Id:6 freeIds=eb
>     4:1736:081 - CREATEID ok: context:1f assigned Id:6 freeIds=eb
>     4:1736:081 - alloc cr in use =4
>     4:1736:083 - [1,0] dsp_assign 0016, 0, 2048
>     4:1736:083 - [1,0] CAI[00] 16 00 00 00 00 08
>     4:1736:084 - [1,0] Download 532 requested
>     4:1736:084 - MORE
>     4:1736:085 - SIG-X(029) 08 01 36 05 A1 04 03 80 90 A3 18 01 83 1E
> 02 80 83 70 0A 80 39 36 33 30 34 35 37 32 33
>                      Q.931  CR36 SETUP
>                             Sending complete
>                             Bearer Capability 80 90 a3
>                             Channel Id 83
>                             Progress Indicator 80 83
>                             Called Party Number 80 '963045723'
>     4:1736:085 - SIG-S 0->1 e:885
>     4:1736:087 - ACTIVATION_REQ
>     4:1744:147 - L1_DOWN
>     4:1744:150 - SIG-EVENT FFFF 08
>
>     4:1744:150 - SIG-EVENT FFFF 08
>
>     4:1744:150 - EVENT: Call failed in State 'Call initiated'
>                      Link disconnected, Layer-1 error (cable or NT)
>     4:1744:150 - SIG-S 1->0 e:ffff
>     4:1744:151 - [1,0] dsp_release
>     4:1744:155 - free cr in use =3
>     4:1744:156 - DELETEID ok: deleted Id:6 freeIds=eb
>
> I disconnect the rj45 cable from alcatel pbx and connect that to the
> diva card (with alcatel pbx i can make calls normally). The green led
> of the diva card is activated when i connect the cable. So i dont
> understand why the message " Link disconnected, Layer-1 error (cable
> or NT)"...
> This debug is th same if the cable is connected to the NT or not.
> Any ideas...? Thanks!
> PS.
>