[asterisk-users] Diva server 4bri and Portuguese BRI

[Armin Schindler]

On Tue, 31 Oct 2006, Pedro Silva wrote:
> Hello,
> 
> One problem is solved and another appears... :(
> I cannot receive incoming calls on trixbox. I defined one incoming
> route (any DID/any CID) and forwading these calls to a SIP extension.
> With capi and sip debug in "asterisk -r" console i dont detect any
> incoming activity...

Did you use
  set verbose 5
  capi debug
?
If not, you should see anything there. But if you don't see activity with 
this verbose level too, this call is not signaled through capi. In that case
you should create traces with
  divactrl ditrace
(or the trace wizard) to get capi activity too.

Armin

> In xlog console i have the following debug:
>  0:1898:127 - SIG-R(034) 08 01 0D 05 A1 04 03 80 90 A3 18 01 81 6C 0B
> 00 83 39 36 33 30 34 35 37 32 33 70 02 81 30 7D 02 91 81
> Q.931  CR0d SETUP
> Sending complete
> Bearer Capability 80 90 a3
> Channel Id 81
> Calling Party Number 00 83 '963045723'
> Called Party Number 81 '0'
> HLC 91 81
> 0:1898:127 - SIG-S 0->6 e:805
> 0:1898:130 - CREATEID ok: context:1f assigned Id:3 freeIds=ec
> 0:1898:130 - alloc cr in use =4
> 0:1898:133 - SIG-X(008) 08 01 8D 45 08 02 80 95
> Q.931  CR8d DISC
>                        Cause 80 95 'Call rejected'
> 0:1898:133 - SIG-x(008) 08 01 8D 5A 08 02 80 D8
> Q.931  CR8d REL_COM
>                        Cause 80 d8 'Incompatible destination'
> 0:1898:133 - SIG-S 6->0 e:8c5
> 0:1898:134 - D-X(012) 00 01 14 16 08 01 8D 5A 08 02 80 D8
> 0:1898:135 - free cr in use =3
> 0:1898:135 - DELETEID ok: deleted Id:4 freeIds=ec
> 0:1898:155 - D-R(004) 00 01 01 16
> 
> So the problem appears to be "Incompatible destination"... but is
> problem in asterisk or is before asterisk, on diva card...?
> 
> Tanks by any possible help!
> Best regards,
> PS.
> 
> 2006/10/29, Pedro Silva <pedromsilva1 at gmail.com>:
> > Finally this works!!! :)
> > Tanks to Alberto and Marco by your help!
> > The problems are:
> > - the cable was connected to the wong card port... :(
> > - the card config needs to be: ETSI; TE; Point-to-Point (I thought
> > that was point-to-multipoint).
> > 
> > Best regards,
> > PS.
> > 
> > 2006/10/29, Pedro Silva <pedromsilva1 at gmail.com>:
> > > Hello again Alberto!
> > > 
> > > > Anyway, to get more info, try to open a second shell
> > > > and run /usr/lib/eicon/divas/xlog
> > > > then on the first shell redo the telsampl test, then
> > > > post the output of xlog off the list to my address
> > > > (alberto at msoft-italia.com)
> > > 
> > > This is the xlog output:
> > > 4:1736:074 - CREATEID ok: context:1f assigned Id:6 freeIds=eb
> > > 4:1736:074 - alloc cr in use =4
> > > 4:1736:076 - free cr in use =3
> > > 4:1736:077 - DELETEID ok: deleted Id:6 freeIds=eb
> > > 4:1736:078 - CREATEID ok: context:1f assigned Id:6 freeIds=eb
> > > 4:1736:078 - alloc cr in use =4
> > > 4:1736:080 - free cr in use =3
> > > 4:1736:080 - DELETEID ok: deleted Id:6 freeIds=eb
> > > 4:1736:081 - CREATEID ok: context:1f assigned Id:6 freeIds=eb
> > > 4:1736:081 - alloc cr in use =4
> > > 4:1736:083 - [1,0] dsp_assign 0016, 0, 2048
> > > 4:1736:083 - [1,0] CAI[00] 16 00 00 00 00 08
> > > 4:1736:084 - [1,0] Download 532 requested
> > > 4:1736:084 - MORE
> > > 4:1736:085 - SIG-X(029) 08 01 36 05 A1 04 03 80 90 A3 18 01 83
> > > 1E
> > > 02 80 83 70 0A 80 39 36 33 30 34 35 37 32 33
> > > Q.931  CR36 SETUP
> > > Sending complete
> > > Bearer Capability 80 90 a3
> > > Channel Id 83
> > > Progress Indicator 80 83
> > > Called Party Number 80 '963045723'
> > > 4:1736:085 - SIG-S 0->1 e:885
> > > 4:1736:087 - ACTIVATION_REQ
> > > 4:1744:147 - L1_DOWN
> > > 4:1744:150 - SIG-EVENT FFFF 08
> > > 
> > > 4:1744:150 - SIG-EVENT FFFF 08
> > > 
> > > 4:1744:150 - EVENT: Call failed in State 'Call initiated'
> > >                 Link disconnected, Layer-1 error (cable or NT)
> > > 4:1744:150 - SIG-S 1->0 e:ffff
> > > 4:1744:151 - [1,0] dsp_release
> > > 4:1744:155 - free cr in use =3
> > > 4:1744:156 - DELETEID ok: deleted Id:6 freeIds=eb
> > > 
> > > I disconnect the rj45 cable from alcatel pbx and connect that to the
> > > diva card (with alcatel pbx i can make calls normally). The green
> > > led
> > > of the diva card is activated when i connect the cable. So i dont
> > > understand why the message " Link disconnected, Layer-1 error (cable
> > > or NT)"...
> > > This debug is th same if the cable is connected to the NT or not.
> > > Any ideas...? Thanks!
> > > PS.
> > > 
> > 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>