[asterisk-users] wrong outgoing caller id with PRI lines: maybe usecallingpres involved?

[Andrew Joakimsen]

Shouldn't it also acquire the callerid of whatever device placed the call?
IE: IP phones callerid= in sip.conf or even the phone itself?

On 10/21/06, Leo Ann Boon <leo at datvoiz.com> wrote:
>
> Massimiliano Stucchi wrote:
> > On 201006, 10:06, Giorgio Incantalupo wrote:
> >
> >> Hi Doug,
> >> I do not use extensions.conf so I cannot show anything but I can assure
> >> that I do not set the callerid except for parameters inside zapata.conf
> :
> >>
> >> usecallerid = yes
> >> callerid = asreceived
> >>
> >
> > I guess the problem is at the telco's side, since the CLI that is shown
> > seems to be the first one of the numbering scheme.  I suppose what you
> >
> That's the default ISDN behavior. If you don't set the caller id, it
> will always send the pilot number. The usecallerid and callerid are for
> incoming, when used on a trunk. They don't apply to outgoing calls. You
> need to set the callerid if you want the DDI number to be sent instead
> of the pilot number.
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061022/8bd12436/attachment.htm