[asterisk-users] Re: Unable to create/find SIP channel for this INVITE & Broadvoice

[vol at kokezaru.net]

Hate to reply to my own message, and top quote, but the resolution here was just
to use sip debug.  Broadvoice was sending the call to a particular extension -my
phone number.  I simply added a Goto to my default dialplan (s) extension, and it
worked.

vol at kokezaru.net wrote:
> I've setup Asterisk to work with Broadvoice for both incoming and outgoing
> calls.  I can make outgoing calls, but when I try to receive an incoming call
> I see the following message on the console:
> 
> [date] NOTICE[8661]: chan_sip.c:13178 handle_request_invite: Unable to create/find SIP channel for this INVITE
> 
> It's registered with Broadvoice:
> 
> Name/username              Host            Dyn Nat ACL Port     Status
> sip.broadvoice.com/xxxxx  147.135.0.128               5060     OK (79 ms)
> 
> Here are my configuration settings related to Broadvoice, I've editted
> out the auth_id and SIP secret.
> 
> pedantic=no
> register => <auth_id>:<secret>:<auth_id>@sip.broadvoice.com
> 
> [sip.broadvoice.com]
> type=peer
> user=phone
> host=sip.broadvoice.com
> fromdomain=sip.broadvoice.com
> fromuser=xxxx
> secret=xxxx
> username=xxxx
> insecure=very
> context=from-pstn
> authname=xxxx
> ;dtmfmode=inband
> ;dtmf=inband
> dtmfmode=rfc2833
> dtm=rfc2833
> canreinvite=no
> qualify=yes
> 
> As you can see, I've tried both rfc2833 and inband for DTMF, but I doubt
> it has any effect over this situation.
> 
> Dialplan:
> 
> [from-pstn]
> exten => s,1,Answer
> exten => s,2,Dial(100,30,tr)
> exten => s,3,Hangup
> 
> I've googled for this, and the only reference I find to this error message
> is in the source to Asterisk.  Any help would be much appreciated.
> 
> Thanks!
>