[asterisk-users] How to send correct Caller ID on PRI

[Eric "ManxPower" Wieling]

Zeeshan Zakaria wrote:
> I set up facilityenable=yes in zapata.conf, but it still didn't work for
> caller name.
> 
> Searched google and found out that when Asterisk is configured as 
> switchtype
> National with signalling pri_net, it does not send the Display information
> in the Facility message. Asterisk insead puts the Caller Name in the 
> Display
> IE.
> 
> In my case signalling is set as pri_cpe but still caller name doesn't go
> through. Only Caller ID goes.
> 
> PRI provider has confirmed that they are not blocking it.
> 
> Any ideas how to fix this problem?

Put a Wait(.5) or Wait(1) or maybe even a Wait(.25) as your first 
priority to allow the facility message to arrive.