[asterisk-users] How to send correct Caller ID on PRI

[Zeeshan Zakaria]

I set up facilityenable=yes in zapata.conf, but it still didn't work for
caller name.

Searched google and found out that when Asterisk is configured as switchtype
National with signalling pri_net, it does not send the Display information
in the Facility message. Asterisk insead puts the Caller Name in the Display
IE.

In my case signalling is set as pri_cpe but still caller name doesn't go
through. Only Caller ID goes.

PRI provider has confirmed that they are not blocking it.

Any ideas how to fix this problem?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061012/c28b6e72/attachment.htm