[asterisk-users] T1 Passthrough

[Vlad B]

We have a solution like this working just fine for almost a year. We are 
using qurad card for that. It is a good idea to have both PRI on one card. 
CLID shouldl remain the same.

Vlad
----- Original Message ----- 
From: "Forrest Beck" <jonforrest.beck at gmail.com>
To: "Asterisk Users List" <asterisk-users at lists.digium.com>
Sent: Monday, October 09, 2006 8:18 PM
Subject: [asterisk-users] T1 Passthrough


>I want to setup a asterisk server with two T1 spans (two TE110P
> cards).  The server will have one card connected to the PRI and the
> other will connect to our Norstar Meridian ICS system.  I want to have
> a very simple dial plan for the context that the PRI card will be
> assigned to something like this.  Note that our telecom provider sends
> final three digits of the phone number:
>
> SPAN 1
> Channels 1-23
> g1
> context: pri_incoming
>
> SPAN 2
> Channels 25-48
> g2
> context: norstar_ics
>
> [pri_incoming]
> exten => _XXX,1,Dial,ZAP/g2/${EXTEN}
>
> My questions are:
>
> Will I need to set the callerid before routing to the next span, or
> will the three digits remain intact.?
> and
> Has anyone tried this? and if so do you forsee any problems i will run 
> into?
>
> This is all theroey in my head right now, since I am awaiting the
> second cards arrival.
>
> Thanks.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>