[asterisk-users] TE110P and TDM400P

[Henk Dick]

I think that you are loading the drivers in the wrong order.  You can change
the order of loading are first define the E1 followed by the TDM400

 

Hope this helps,

 

Henk 

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Lincoln
Zuljewic Silva
Sent: woensdag 22 november 2006 20:51
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] TE110P and TDM400P

 

Hello all. I have here a TE110P (configured as E1) and a TDM400P (with four
X100P - FXS). Both boards are recognized by the operating system as showed
above:

 

0000:08:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface
        Subsystem: Unknown device b1d9:0003
        Flags: bus master, medium devsel, latency 64, IRQ 169
        I/O ports at e800 [size=256]
        Memory at febff000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2

 

0000:08:01.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
interface
        Subsystem: Unknown device 79fe:0001
        Flags: bus master, medium devsel, latency 64, IRQ 193
        I/O ports at e400 [size=256]
        Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2

 

The problem is that I cant make the both cards to work together in the same
server. Here is my /etc/zaptel.conf:

 

###
fxsks=1-4
loadzone = us
defaultzone=us

 

span=1,1,0,ccs,hdb3,crc4
bchan=5-19,21-35
dchan=20
###

 

When I load the wctdm module, I get this error: ZT_CHANCONFIG failed on
channel 5: No such device or address (6). Its sounds like the FXS module its
tring to configure the channels 5 to 35 (E1 - ISDN Channels - TE110P card).

 

Anybody already saw this ? Its possible to use this two cards in the same
computer ? There is any separator that I can use in zaptel.conf to make the
load of the modules dont mistakes itself ?

 

Here is my versions:
Debian kernel - 2.6.8
asterisk-1.2.12.1
libpri-1.2.4
zaptel-1.2.11 

 

 

Thanks

Lincoln

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061122/4cfba6fd/attachment.htm