[asterisk-users] International dialing with GPX-2000 and "early dial"

[Anthony Kepler]

We are on the same page.
If you happen to find a solution - or know of a way that other phones 
address these issues, please let me know.

Andrew Joakimsen wrote:
> Ok, I actually GOT a GXP-2000. It does not have a dialplan. You 
> cannnot dial without the handset off-hook. I do not seem to find a way 
> to use early dial for international calls in a practical way, not 
> being able to dial international calls is not acceptable. Having to 
> dial # or send for domestic calls isnt either, and neither is having 
> to wait 4 or 5 seconds for domestic calls to complete....
>
> Or am I missing something?
>
> On 11/8/06, *Anthony Kepler* <anthony at jivanjeearch.com 
> <mailto:anthony at jivanjeearch.com>> wrote:
>
>     Early dial is a feature on the phone that makes use of the 484
>     ("Address
>     Incomplete") response.
>     This is desired for in-office, local (PSTN), and long distance
>     dialing.
>     I'm really hoping to find a "best-of-both-worlds" solution to this.
>
>     Andrew Joakimsen wrote:
>     > Does the GXP-2000 not have its own dialplan? Use that and disable
>     > early dial
>     >
>     > On 11/3/06, *Anthony Kepler* <anthony at jivanjeearch.com
>     <mailto:anthony at jivanjeearch.com>
>     > <mailto:anthony at jivanjeearch.com
>     <mailto:anthony at jivanjeearch.com>>> wrote:
>     >
>     >     I am trying to allow users to place outgoing international calls
>     >     from a
>     >     GPX-2000 with "early dial" enabled, connected to Asterisk
>     1.2.12.1 <http://1.2.12.1>
>     >     <http://1.2.12.1>
>     >     I have the following extension line:
>     >     exten => _011.,n,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
>     >
>     >     When I attempt to place a call to a number in, for instance,
>     Kenya, I
>     >     dial "011254"...etc.
>     >     and I get this on the asterisk console:
>     >     Executing Dial("SIP/1001-081fb718", "Zap/g1/0112") in new stack
>     >        -- Called g1/0112
>     >
>     >     It is attempting to dial out as soon as it receives a single
>     digit to
>     >     represent the "."
>     >     What I need is for it to wait a reasonable amount of time for
>     >     additional
>     >     digits.
>     >     I have tried using set(TIMEOUT(digit)=5), and I see the
>     following
>     >     in the
>     >     asterisk console:
>     >        -- Executing Set("SIP/1001-081fb718", "TIMEOUT(digit)=5") in
>     >     new stack
>     >        -- Digit timeout set to 5
>     >     However, this is printed far less than 5 seconds before the
>     dial out
>     >     attempt.
>     >
>     >     I assume there must be something relatively obvious I'm missing
>     >     here...
>     >     if anyone can shed some light on this, it would be greatly
>     >     appreciated.
>     >
>     >
>     >     Thank you,
>     >        - Anthony Kepler
>     >         anthony at jivanjeearch.com
>     <mailto:anthony at jivanjeearch.com> <mailto:anthony at jivanjeearch.com
>     <mailto:anthony at jivanjeearch.com>> |
>     >     SIP/Email
>     >     _______________________________________________
>     >     --Bandwidth and Colocation provided by Easynews.com
>     <http://Easynews.com>
>     >     <http://Easynews.com> --
>     >
>     >     asterisk-users mailing list
>     >     To UNSUBSCRIBE or update options visit:
>     >        http://lists.digium.com/mailman/listinfo/asterisk-users
>     >     < http://lists.digium.com/mailman/listinfo/asterisk-users>
>     >
>     >
>     >
>     ------------------------------------------------------------------------
>     >
>     > _______________________________________________
>     > --Bandwidth and Colocation provided by Easynews.com
>     <http://Easynews.com> --
>     >
>     > asterisk-users mailing list
>     > To UNSUBSCRIBE or update options visit:
>     >     http://lists.digium.com/mailman/listinfo/asterisk-users
>     >
>
>     _______________________________________________
>     --Bandwidth and Colocation provided by Easynews.com
>     <http://Easynews.com> --
>
>     asterisk-users mailing list
>     To UNSUBSCRIBE or update options visit:
>        http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>