[asterisk-users] Definity Asterisk CallerID Issue

[Steve Totaro]

Steve Totaro wrote:
> cp wrote:
>>
>> I am hoping someone could shed some light and point me in the right 
>> direction? I’m attempting to get callerid work between an Avaya 
>> Definity PBX and Asterisk via TE110P connected via T1/PRI Crossover 
>> PRI. From the Definity side I’ve searched endlessly and came with an 
>> example which we modeled as close as we can, but still no luck. While 
>> doing PRI intense debug span 1 in I see a couple interesting messages 
>> but have yet to come up with meaningful knowledge about them. I’ve 
>> tried decoded the setup message but don’t know what I’m really 
>> looking at. It appears in the decode that the calling party number or 
>> name are not being sent but as I mentioned I don’t know what I am 
>> really looking at. I wondering if these error messages have any thing 
>> to do with Asterisk not knowing what to do with what the Definity is 
>> sending? Feel free to contact me offlist. Any assistance is greatly 
>> appreciated.
>>
>> -CP
>>
>> !! < Unknown IE 1544 (len = 6)
>>
>> !! Unknown IE 8 (cs6, Unknown Information Element)
>>
>> Progress Description: Calling equipment is non-ISDN
>>
>> TON: International Number
>>
>> xxx*CLI>
>>
>> < [ 02 01 d4 d2 08 02 0a e6 05 04 03 90 90 a2 18 03 a1 83 8b 1e 02 81 
>> 83 70 05 91 34 33 38 39 96 08 04 d0 35 30 80 ]
>>
>> < Protocol Discriminator: Q.931 (8) len=33 < Call Ref: len= 2 
>> (reference 2790/0xAE6) (Originator) < Message type: SETUP (5) < [04 
>> 03 90 90 a2] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info 
>> transfer capability: 3.1kHz audio (16)
>>
>> < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
>>
>> < Ext: 1 User information layer 1: u-Law (34)
>>
>> < [18 03 a1 83 8b]
>>
>> < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, 
>> Preferred Dchan: 0
>>
>> < ChanSel: Reserved
>>
>> < Ext: 1 Coding: 0 Number Specified Channel Type: 3
>>
>> < Ext: 1 Channel: 11 ]
>>
>> < [1e 02 81 83]
>>
>> < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard 
>> (0) 0: 0 Location: Private network serving the local user (1)
>>
>> < Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ]
>>
>> < [70 05 91 34 33 38 39]
>>
>> < Called Number (len= 7) [ Ext: 1 TON: International Number (1) NPI: 
>> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '4389' ] < [96] < 
>> Locking Shift (len=01): Requested codeset 6 < [08 04 d0 35 30 80] !! 
>> < Unknown IE 1544 (len = 6) !! Unknown IE 8 (cs6, Unknown Information 
>> Element) Sending Receiver Ready (107)
>>
>> > [ 02 01 01 d6 ]
>>
>>
>
> Why type of card do you have on the Definity Side?
>
Also, what is your signalling on the Definity and Asterisk?

Thanks,
Steve Totaro