[asterisk-users] Definity Asterisk CallerID Issue

[Steve Totaro]

cp wrote:
>
> I am hoping someone could shed some light and point me in the right 
> direction? I’m attempting to get callerid work between an Avaya 
> Definity PBX and Asterisk via TE110P connected via T1/PRI Crossover 
> PRI. From the Definity side I’ve searched endlessly and came with an 
> example which we modeled as close as we can, but still no luck. While 
> doing PRI intense debug span 1 in I see a couple interesting messages 
> but have yet to come up with meaningful knowledge about them. I’ve 
> tried decoded the setup message but don’t know what I’m really looking 
> at. It appears in the decode that the calling party number or name are 
> not being sent but as I mentioned I don’t know what I am really 
> looking at. I wondering if these error messages have any thing to do 
> with Asterisk not knowing what to do with what the Definity is 
> sending? Feel free to contact me offlist. Any assistance is greatly 
> appreciated.
>
> -CP
>
> !! < Unknown IE 1544 (len = 6)
>
> !! Unknown IE 8 (cs6, Unknown Information Element)
>
> Progress Description: Calling equipment is non-ISDN
>
> TON: International Number
>
> xxx*CLI>
>
> < [ 02 01 d4 d2 08 02 0a e6 05 04 03 90 90 a2 18 03 a1 83 8b 1e 02 81 
> 83 70 05 91 34 33 38 39 96 08 04 d0 35 30 80 ]
>
> < Protocol Discriminator: Q.931 (8) len=33 < Call Ref: len= 2 
> (reference 2790/0xAE6) (Originator) < Message type: SETUP (5) < [04 03 
> 90 90 a2] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info 
> transfer capability: 3.1kHz audio (16)
>
> < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
>
> < Ext: 1 User information layer 1: u-Law (34)
>
> < [18 03 a1 83 8b]
>
> < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, 
> Preferred Dchan: 0
>
> < ChanSel: Reserved
>
> < Ext: 1 Coding: 0 Number Specified Channel Type: 3
>
> < Ext: 1 Channel: 11 ]
>
> < [1e 02 81 83]
>
> < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard 
> (0) 0: 0 Location: Private network serving the local user (1)
>
> < Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ]
>
> < [70 05 91 34 33 38 39]
>
> < Called Number (len= 7) [ Ext: 1 TON: International Number (1) NPI: 
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '4389' ] < [96] < 
> Locking Shift (len=01): Requested codeset 6 < [08 04 d0 35 30 80] !! < 
> Unknown IE 1544 (len = 6) !! Unknown IE 8 (cs6, Unknown Information 
> Element) Sending Receiver Ready (107)
>
> > [ 02 01 01 d6 ]
>
>

Why type of card do you have on the Definity Side?