[asterisk-users] TDM400 hungup problem

[Ale]

Ciao,

Giorgio Incantalupo wrote:
> Hi Ale,
> your problem is quite strange. Can you try with an analog phone or 
> another SIP phone?
We had try to call the local number attached to the tdm400 from a cell 
phone, another phone (real),
 and from a voip provider always with the same result... the phone of 
the caller doesn't hangup after
the hangup command of asterisk.
> My zaptel and zapata are the same as yours but I have not the problem 
> you describe.
> And Asterisk console?? Doesn't  it say anything useful??

Nothing useful i think...

voip*CLI>
    -- Starting simple switch on 'Zap/2-1'
Nov  3 18:39:10 NOTICE[2024]: chan_zap.c:6073 ss_thread: Got event 18 
(Ring Begin)...
Nov  3 18:39:11 NOTICE[2024]: chan_zap.c:6073 ss_thread: Got event 2 
(Ring/Answered)...
    -- Executing Answer("Zap/2-1", "") in new stack
    -- Executing Dial("Zap/2-1", "SIP/phone|20") in new stack
    -- Called phone
    -- SIP/phone-0815dbd8 is ringing
    -- SIP/phone-0815dbd8 answered Zap/2-1
    -- Executing NoOp("Zap/2-1", ""asd 16"") in new stack
    -- Hungup 'Zap/2-1'
voip*CLI>


>
> Notice that if the caller phone must be a normal phone...if it is a 
> cell phone it does not automatically hang up.
>
Notice that we have try also to call  from a softphone sip and a 
realphone attached on the fxs
of the tdm400 and viceversa and all works fine.
Our operetor is Telecom Italia...
 

Ciao Ciao Ale