[Asterisk-Users] Info

[Alexander Lopez]

I guess that depends on the type of loop that serves you. If it is a
HDSL loop then the SmartJack would be responsible for the build out. If
it is a traditional T1 loop it would be set from the CO.
 

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Eric "ManxPower" Wieling
> Sent: Saturday, May 06, 2006 2:23 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Info
> 
> Alexander Lopez wrote:
> > The line build out value is a power level that is set based on the
> > distance from the Device to the T-1 service provider's gateway. If
the
> > device is close by, the gateway requires less power and the line
build
> > out value is lower; if the device is far away, the gateway requires
more
> > power and the line build out value is higher. This setting is
determined
> > by the T-1 service provider.
> 
> The LBO for all T-1s that I've ever seen has been from the smartjack,
> not the CO.
> 
> 
> --
> Now accepting new clients in Birmingham, Atlanta, Huntsville,
> Chattanooga, and Montgomery.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users